Chapter 2
^LL - Label Length
This command defines the length of a label in printer dots. Any label printed on continuous media causes the defined length of media to be moved.
^LR - Label Reverse
This command provides the ability to reverse print ALL fields following the ^LR in a label (in contrast with the ^FR command which reverse prints only an individual field).
^LS - Label Shift
This command shifts the “home” position to the left by a defined number of dots. It is used so that the label definitions for printers where narrow media is “right justified” works on printers that are “left justified.”
^LT - Label Top
This command shifts the label image vertically on the media.
~Lx - Base Emulation Support
PPI supports text printing using the LP+ emulation. See Chapter 3.
^MM - Print Mode
This command determines what happens after a label has been printed: tear off, rewind, peel off, continuous, and cutter.
^MT - Media Type
This command selects the type of media used: thermal transfer or direct thermal.
^MU - Mode Units
This command selects the measurement units in commands having parameters, which specify distance, height, or width.
~NC - Network Connect
This command connects a particular printer to a network by calling up the printer’s network ID number.
^NI - Network ID Number
This command assigns a network ID number to the printer. This must be done before the printer can be used in a network.
~NR - Set All Network Printers Transparent
This command sets all printers in the network to transparent, regardless of the ID or current mode.
22