Saving or Recalling a Preset

A "preset" is a configuration that has been stored.

1.Save a preset — Press and hold the Preset button until it flashes.

Save a

PRESET 2 seconds

PRESET

preset

 

Press and hold.

The Preset button blinks.

Recall a preset — Press and release the Preset button.

Recall a

PRESET

 

 

 

PRESET

 

preset

 

 

 

 

 

 

 

 

 

 

 

 

Press and release.

The Preset button lights.

All input and output buttons with assigned presets light red.

When a preset is saved, the configuration data at assigned preset locations is overwritten.

INPUTS

1 2 3 4 5 615 16

2.Press and release the desired input or output button.

The button blinks red to indicate that this preset is selected to save or recall.

1

ENTER

The Enter button blinks

red to indicate the need to

 

 

 

activate the save or recall.

3.Press and release the Enter button.

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are:

Selecting Lock Mode 2 or Toggling Between

Mode 2 and Mode 0

NOTES:

If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Preset, View, and Esc buttons flash twice.

If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the switcher). The View and Esc buttons flash twice.

Toggle the lock on or off by pressing and holding the Preset, View, and Esc buttons simultaneously until the buttons flash (approximately 2 seconds).

Lock mode 2

 

 

Lock mode 0

 

C O N T R O L

 

C O N T R O L

 

C O N T R O L

 

C O N T R O L

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

Press and hold for

Press and hold for

2 seconds.

2 seconds.

Selecting Lock Mode 2 or Toggling Between

Mode 2 and Mode 1

NOTES:

If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Preset, View, and Esc buttons flash twice.

If the switcher is in Lock mode 2, this procedure selects mode 1. The View and Esc buttons flash twice.

Toggle the lock on and off by pressing and holding the Video button and the Audio button simultaneously for approximately 2 seconds.

Lock mode 0 — The front panel is completely unlocked.

Lock mode 1 — All functions are locked from the front panel (except for setting Lock mode 2). Some functions can be viewed.

Lock mode 2 — Basic functions are unlocked. Advanced functions are locked and can be viewed only.

Basic functions consist of:

Making ties

Saving and recalling presets

Setting input audio gain and attenuation

Changing Lock modes Advanced functions consist of:

Setting audio output mutes

Setting audio output volume

Setting audio/RS-232 wire pair and front panel configuration The switcher is shipped from the factory in Lock mode 2.

Lock mode 1

C O N T R O L

ENTER PRESET VIEW ESC

Press and hold for 2 seconds.

Lock mode 2

C O N T R O L

 

C O N T R O L

 

C O N T R O L

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

ENTER PRESET

VIEW

ESC

Press and hold for 2 seconds.

18 XTP CrossPoint 1600 and 3200 • Front Panel Operations

XTP CrossPoint 1600 and 3200 • Front Panel Operations 19

Page 13
Image 13
Extron electronic 1600 setup guide Saving or Recalling a Preset, Setting the Front Panel Locks Executive Modes