Extron electronic 1600 setup guide Audio output volume, Audio mutes, View video and audio mutes

30 XTP CrossPoint 1600 and

Command	SIS Command	Response	Additional Description
	(Host to Unit)	(Unit to Host)
Audio output volume
Set the volume to a specific value	X@*X1%V	OutX@•VolX1%]
Example:	1*50v	]	Set output 1 volume to 79%.
		Out01•Vol50
Increment volume	X@+V	OutX@•VolX1%]	Increase volume by 1 step.
Example:	1+V	]
		Out01•Vol51
Decrement volume	X@–V	OutX@•VolX1%]	Decrease volume by 1 step.
Read output volume	X@V	X1%]
Audio mutes

3200 • Remote Control

Audio mute, HDMI	X@*1Z	AmtX@*1]
Audio mute, analog	X@*2Z	AmtX@*2]
Audio mute, both	X@*3Z	AmtX@*3]
Audio unmute	X@*0Z	AmtX@*0]
Read audio mute	X@Z	X1)]
Global audio mute, HDMI	1*Z	Amt1]
Global audio mute, analog	2*Z	Amt2]
Global audio mute, both	3*Z	Amt3]
Global audio unmute	0*Z	Amt0]

Mute output X@ HDMI (embedded digital audio off). Mute output X@ analog (analog audio off).

Mute all output X@ audio (HDMI and analog audio off). Unmute output X@ (HDMI and analog audio on).

1 = mute on, 0 = mute off.

Mute all embedded digital audio outputs. Mute all analog audio outputs.

Mute all embedded digital and analog audio outputs. Unmute all audio outputs.

NOTE:	• = Space
	X@ = Output number		01 – 16 or 32
	X1)	= Mute	0	= off (unmuted)	2	= analog on (analog muted)
	X1%		1	= HDMI on (HDMI muted)	3	= HDMI and analog on (both muted)
		= Volume adjustment range	0	– 64 (1 dB/step except for 0-to-1, which is 22 dB) (default = 64 [0 dB])

XTP CrossPoint 1600 and 3200 • Remote Control 31

Command	SIS Command		Response		Additional Description
	(Host to Unit)		(Unit to Host)
View video and audio mutes
View output mutes	EVM}		X1^1X1^2... X1^n]	Each X1^ response is the mute status of an output, starting
				from output 1. n = either 16 or 32.
Example :	EVM}			Audio is muted on outputs 2 and 3, video on output 5,
(XTP CrossPoint 3200)	Mut02201000000000000000000002000000] and video and audio on output 26. All other outputs are
				unmuted.
List Digital Sync Validation Processing (DSVP)
List sync of all inputs	0LS		X1&1X1&2X1&3 ... X1&n]	16 or 32 (n) X1&s; each is the signal status of an input,
				starting from input 1.
Example	0LS		no input detected input detected
(XTP CrossPoint 3200):			Response Status: 0 0 0 1 1 1 0 . . . 0
			Input: 1 2 3 4 5 6 7		32
Lock (Executive) modes
NOTE: See Setting the front panel locks (executive modes) on page 18 for more information on the Lock modes.
Lock all front panel functions	1X		Exe1]	Enable Lock mode 1.
Lock advanced front panel	2X		Exe2]	Enable Lock mode 2.
functions
Unlock all front panel functions	0X		Exe0]	Enable Lock mode 0.
View lock status	X		X1*]
NOTE: X1^ = Video and audio mute status		0 = no mutes		2 = audio mute
X1& = Signal detection status		1 = video mute		3 = video and audio mute
		0 = no input connected		1 = input connected
X1* = Lock mode		0 = lock mode 0 (unlocked)		1 = lock mode 1		2 = lock mode 2