26 XTP CrossPoint 1600 and 3200 • Remote Control
Command | SIS Command | Response | Additional Description |
| (Host to Unit) | (Unit to Host) |
|
Tint (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Tint adjustments are available for NTSC
Set a specific tint value | EIX!*X%TINT} | TintIX!*X%] | Specify the tint adjustment. |
Increment tint value | EIX!+TINT} | TintIX!*X%] | Increase the tint setting by one. |
Decrement tint value | TintIX!*X%] | Decrease the tint setting by one. | |
View the tint value | EIX!TINT} | X%] | Show the tint setting. |
Brightness (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Brightness adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), 
inputs.
Set a specific brightness value | EIX!*X%BRIT} | BritIX!*X%] | Specify the brightness adjustment. |
Increment brightness value | EIX!+BRIT} | BritIX!*X%] | Increase the brightness. |
Decrement brightness value | BritIX!*X%] | Decrease the brightness. | |
View the brightness value | EIX!BRIT} | X%] | Show the brightness setting. |
Contrast (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Contrast adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), 
inputs.
Set a specific contrast value | EIX!*X%CONT} | ContIX!*X%] | Specify the contrast adjustment. |
Increment contrast value | EIX!+CONT} | ContIX!*X%] | Increase the contrast. |
Decrement contrast value | ContIX!*X%] | Decrease the contrast. | |
View the contrast value | EIX!CONT} | X%] | Show the contrast setting. |
NOTE: | X! = Input number | 01 – 16 or 32 |
| X% = Picture adjustments | 0 through 255 |
XTP CrossPoint 1600 and 3200 • Remote Control 27
Command | SIS Command | Response | Additional Description |
| (Host to Unit) | (Unit to Host) |
|
Pixel phase (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: | Pixel phase adjustments are available for RBGHV and |
Set a specific pixel sampling phase | EIX!*X%PHAS} | PhasIX!*X%] | Specify the pixel sampling phase. |
Increment sampling value | EIX!+PHAS} | PhasIX!*X%] | Increase the phase value. |
Decrement sampling value | PhasIX!*X%] | Decrease the phase value. | |
View the sampling value | EIX!PHAS} | X%] | Show the pixel sampling phase. |
Horizontal shift (available for inputs on an XTP CP 4i VGA universal analog input board only) | |||
Specify a horizontal position | EIX!*X^HCTR} | HctrIX!*X^] | Set input X! horizontal position to X^. |
Increment right | EIX!+HCTR} | HctrIX!*X^] | Shift the X! input right. |
Decrement left | HctrIX!*X^] | Shift the X! input left. | |
View the horizontal position | EIX!HCTR} | X^] | Show the horizontal position. |
| |||
Vertical shift (available for inputs on an XTP CP 4i VGA universal analog input board only) | |||
Set a specific vertical position | EIX!*X^VCTR} | VctrIX!*X^] | Set input X! vertical position to X^. |
Increment up | EIX!+VCTR} | VctrIX!*X^] | Shift the X! input up. |
Increment down | VctrIX!*X^] | Shift the X! input down. | |
View the vertical position | EIX!VCTR} | X^] | Show the vertical position. |
|
|
|
|
NOTE: | X! = Input number | 01 – 16 or 32 |
| X% = Picture adjustments | 0 through 255 |
| X^ = Shift | 0 through 65535 |
