Extron electronic 1600 setup guide XTP System Configuration Program, Accessing the Html Pages

XTP System Configuration Program

Another way to operate the switcher is via the Windows®-based XTP System Configuration software. For details on installing and operating the program, see the XTP System Configuration Software Guide.

Accessing the HTML Pages

NOTES:

• If your Ethernet connection to the matrix switcher is unstable, try turning off the proxy server in your web browser. In Microsoft Internet Explorer, click Tools > Internet Options > Connections > LAN Settings, uncheck the Use a proxy server... box, and then click OK.

• For details on operating the switcher via HTML pages, see the "HTML Operation" section in the XTP CrossPoint 1600 and 3200 User Guide.

1.	Start the web browser program.
2.	Click in the Address field.
3.	Enter the Matrix IP address in the Address field.
	NOTE: 192.168.254.254 is the factory-specified default value for
	this field.
4.	Press the keyboard <Enter> key. The switcher checks whether it is
	password-protected.
	If the switcher is not password-protected, it checks and
	downloads the HTML start-up page. The switcher is ready for
	operation via HTML remote control.
	If the switcher is password-protected, it downloads the Enter
	Network Password dialog box (see figure 10).

Figure 10. Network Password Dialog Box

NOTE: A User name entry is not required.

5.Enter the appropriate administrator or user password in the Password field and click OK.

The switcher downloads the HTML start-up page (see figure 11). The switcher is ready for operation via HTML remote control.

Figure 11. HTML Startup Page

42 XTP CrossPoint 1600 and 3200 • Remote Control XTP CrossPoint 1600 and 3200 • Remote Control 43