Zebra Technologies SL5000r/T5000r manual $B Upcship

Chapter 3

^B$B - UPCSHIP

Command Format: ^B$B fp, hgt, rdt, pos

b:UPCSHIP barcode command fp: Barcode orientation

N = No Rotation (Default)

R = Rotate 90 degrees, clockwise I = Rotate 180 degrees, inverted

B = Rotate 90 degrees, counter-clockwise hgt: Barcode Height

Value entered in dots at the printer dpi.

The default is 10 dots or the height set by the ^BY command. If the height exceeds the label length, then the barcode is cut off at the bottom of the label.

rdt: Human readable data

Y = Print human readable data (Default) N = No human readable data

pos: Human readable data print position Y = Print it above the barcode

N = Print it below the barcode (Default)

^B$C - EAN/UCC-128

Command Format: ^B$C fp, hgt, rdt, pos, chk

c:EAN/UCC-128 barcode command fp: Barcode orientation

N = No Rotation (Default)

R = Rotate 90 degrees, clockwise I = Rotate 180 degrees, inverted

B = Rotate 90 degrees, counter-clockwise hgt: Barcode Height

Value entered in dots at the printer dpi.

The default is 10 dots or the height set by the ^BY command. If the height exceeds the label length, then the barcode

is cut off at the bottom of the label. rdt: Human readable data

Y = Print human readable data (Default) N = No human readable data

pos: Human readable data print position Y = Print it above the barcode

N = Print it below the barcode (Default) chk: Mod-103 Check Digit (only applies to subset C)

Y = Calculate and print check digit N = No check digit (Default)

26