Nortel Networks 1002rp manual Switch connectivity, CallPilot Elan and Clan network setup

1002rp server description Standard 1.07

In the previous illustration, the telephony LAN (TLAN) provides IP connectivity between the Succession 1000 system and the i2004 Internet phonesets. The connection between the call server and media gateway can be point-to-point, or it can be through the LAN, if the system is installed in a distributed data network.

For information about the Succession 1000 system and i2004 Internet phoneset bandwidth and network requirements, refer to the Succession Communication Server for Enterprise 1000 Planning and Installation Guide (553-3023-210).

Switch connectivity

For more details about how the 1002rp server and switch connection is established, refer to the Installation and Configuration Task List (555-7101-210).

CallPilot ELAN and CLAN network setup

The 1002rp server provides 10/100Base-T Ethernet connectivity through NICs installed in the server. See “Slot assignments” on page 21 for details on the location of NICs. The function of the NIC varies based on switch connectivity, as described below:

Meridian 1 or Succession 1000 systems

„One NIC provides connectivity to the ELAN.

For information about the purpose and requirements of the ELAN, see the Planning and Engineering Guide (555-7101-101).

„A second NIC is optional.

This optional NIC is required only for Meridian 1 or Succession 1000 systems that require a CLAN connection (in addition to the ELAN connection). The CLAN provides data connectivity between desktop and web messaging clients, web-enabled administrative PCs, and the CallPilot server.

28 CallPilot