Nortel Networks 1002rp manual Modem DIP switches, Dip

Installing the server and connecting the peripheral devices Standard 1.07

Modem DIP switches

Set the modem DIP switches before you connect the modem to the CallPilot server.

Note: This section applies only to the U.S. Robotics 56-Kbit/s external Sportster modem. If your modem is different, refer to the documentation for your modem.

The following diagram shows the key components of the external modem, including the location and required settings of the DIP switches:

RJ-11			DIP								Serial cable	Power
connection			switches								(RS-232)	connection
											connection
		1	2	3	4	5	6	7	8
Switch positions:
OFF
ON
1	2	3			4		5		6	7	8
												G101445

62 CallPilot