Nortel Networks 1002rp manual Inspecting the server interior, To inspect the server interior

Preparing for installation Standard 1.07

Inspecting the server interior

Introduction

You should perform a visual inspection for loose components, foreign matter, or shipping damage inside the server.

CAUTION

Risk of equipment damage

When working with interior components, use an ESD wrist strap to protect static-sensitive components.

To inspect the server interior

1Carefully check all the cards to ensure they are fully seated on the baseboard.

2Check for any loose wires or foreign objects, such as loose screws, inside the chassis.

3Review the slot locations (see “Slot assignments” on page 21).

4Do one of the following:

IF	THEN
you observe any damage	contact your Nortel technical
	support representative.

components have become loose

secure them.

Refer to the procedures in the Installation and Configuration Task List (555-7101-210).

42 CallPilot