Nortel Networks 1002rp manual Preparing the modem, Required equipment

October 2006 Installing the server and connecting the peripheral devices

Preparing the modem

Introduction

You require a modem to support remote dial-up access to the CallPilot server. The modem also enables Nortel technical support to connect to your CallPilot server for troubleshooting purposes. Nortel connects to your server only when you request technical assistance.

Required equipment

To install the modem, you need the following equipment:

„an RJ-11 analog phone cord

„a power adapter cord

„an analog line jack

„tweezers, or a screwdriver small enough to use to adjust DIP switches

The following modem is provided with your server:

„an analog external U.S. Robotics 56-Kbit/s modem (NTRH9078) that includes a 25-pin male to 9-pin female shielded serial cable for your modem

Note: Ensure that you have the correct cable for your modem, as follows:

„ 56-Kbit/s modem: A0841984

1002rp Server Hardware Installation 61