October 2006Preparing for installation
Step | Description | Check |
|
|
|
6 | For a | ❒ |
| page 50). |
|
|
|
|
7 | Place the 1002rp server in the chosen location (see page 60). | ❒ |
|
|
|
8 | Replace the front bezel (see page 44). | ❒ |
|
|
|
9 | Set the DIP switches on the modem (see page 61). | ❒ |
|
|
|
10 | Connect the 1002rp server and devices as follows: |
|
| Connect the monitor, keyboard, and mouse (see page 65). | ❒ |
| Connect the modem (see page 61). | ❒ |
| Connect the 1002rp server to the ELAN hub (Meridian 1 or | ❒ |
| Succession 1000 only) (see page 68). |
|
| ATTENTION |
|
| To comply with EMC radiation requirements, a Class A hub |
|
| must be located 10 m (33 ft.) away from the 1002rp server. |
|
| Shielded Ethernet cables must be used. |
|
| Note: If you are connecting the optional CLAN, do not power | ❒ |
| up unless your antivirus programs and Nortel security updates |
|
| are installed first. |
|
Connect the 1002rp server to the CLAN hub (optional) (see page 71).
ATTENTION
To comply with EMC radiation requirements, a Class A hub must be located 10 m (33 ft.) away from the 1002rp server. Shielded Ethernet cables must be used.
| | Install the software feature dongle (see page 73). | ❒ |
| | Connect the power cords for all devices, and then power | ❒ |
|
| them up. |
|
|
|
| |
11 | Start the 1002rp server (see page 75). | ❒ | |
|
|
|
|
1002rp Server Hardware Installation | 35 |