Nortel Networks 4400, RELEASE 4.1 manual Defining Node ID, Defining Customer ID

Page 53

Chapter 6 CLI Procedure for Creating a Node Profile 53

Defining Node ID

To define a node ID, use the following CLI command:

CLI> define msm profile nodeID

Parameter

Range of Value

Required Action

 

 

 

<NodeID>

INTEGER (1..65535)

Enter an integer between 1 and

 

 

65535. If your network uses node

 

 

IDs to identify Passport 4460 units,

 

 

be sure to assign each unit a unique

 

 

node ID.

 

 

 

Example:

CLI> define msm profile nodeID 23

If you don’t want to modify any more parameters in this window, go to “Saving the Current Configuration and Resetting the Unit” on page 54, or continue with “Defining Customer ID” on page 53.

Defining Customer ID

To define a customer ID, use the following CLI command:

CLI> define msm profile customerID

Note: The element msm signifies the MPANL signal mechanism. The customer ID is expressed as an integer between 0 and 65535. The terms MPANL and PANL both refer to the same protocol and may be used interchangeably.

Parameter

Range of Value

Required Action

 

 

 

<CustomerID>

INTEGER (0..65535)

Enter an integer between 1 and

 

 

65535.

 

 

 

Getting Started with Passport 4400, Release 4.1

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Getting Started with Passport 4400, Release Trademarks Copyright 2000 Nortel Networks, IncRestricted Rights Legend Statement of ConditionsLimitations of Remedies EC Declaration of ConformityTechnical Data Safety Warnings and CautionsWarnungAvertissement Technische Daten Donnees TechniquesNotification of Canadian Requirements Notification of FCC Requirements209664-A Contents Chapter Accessing the CLI and Basic Configuration Index Contents 209664-A Chapter Introduction Unpacking the Unit List of DocumentationPassport software license Device Management Tools Determining Which Management Tool to UsePassport 4400 Install Network Management Tools Pmdm Introduction 209664-A Chapter Online Documentation Accessing the Online DocumentationOpen the documentation For installing documentation from the CD-ROMNavigating Online Documentation Online Documentation Site Map Online Documentation Printing Online Documentation Browsers Browser How to Get Optimum Results Operation Passport 4400 Rel Software Online Documentation 209664-A Workstation Requirements Chapter Hardware SetupIf you are using You need If you are using Refer to Installing Passport 4460 HardwareChapter Configurator Procedure for Creating a Node Profile Accessing the Configurator Through a Web Browser Viewing Node Profile Information Defining a Unique DNA Prefix Click on ConfigureDefining a Node ID on Defining a Customer ID on Defining a Node NameDefining a Node ID Defining a Customer ID Resetting the UnitSetting the DNA Numbering Plan Overriding the DNA Numbering Plan Passport 4400 Configurator Documentation URL UpdateSetting the System Clock Configurator Procedure for Creating a Node Profile Configurator Procedure for Creating a Node Profile 209664-A Using a Terminal Chapter Accessing the CLI and Basic ConfigurationCommunication Parameter Set-Up Requirements Accessing the CLI and Basic Configuration Hardware in the flow control field Logging into the CLI Using the Terminal Emulation ProgramAssigning the IP Address Parameter Range of Values Required Actions Chapter CLI Procedure for Creating a Node Profile CLI Procedure for Creating a Node Profile Parameter Range of Values Required Action Defining Node ID on Defining Customer ID on Parameter Range of Value Required Action Defining Node IDDefining Customer ID Saving the Current Configuration and Resetting the Unit Confirming the New ConfigurationSetting the System Clock CLI Procedure for Creating a Node Profile IfIndex Overview Appendix a IfIndexes and Interface IdentificationIfIndex Description Hard-Coded IfIndexesReserved IfIndexes and Ranges Safe IfIndex Ranges IfIndex RangesIfIndex Table Display Description Configurator Procedure for Displaying the IfIndex TableSlot CLI Procedure for Displaying the IfIndex TableIfIndex IfExtType PPA Number IfIndex Table Display DefinitionsChannel Number Slot NameAppendix a IfIndexes and Interface Identification 209664-A Application Code Appendix B Installing System Software from the CD-ROMDownloading Application Software Configurator Procedure for Downloading Application SoftwareCommit the Application Code Bank Select Administration and Code BankSave the Current Configuration and Reset the Unit CLI Procedure for Downloading Application Software Appendix B Installing System Software from the CD-ROM Babt CSA FCC TUV IndexIndex Index Index 209664-A
Top Page Image Contents