Nortel Networks 4400, RELEASE 4.1 manual CLI Procedure for Downloading Application Software

Page 69

Appendix B Installing System Software from the CD-ROM 69

CLI Procedure for Downloading Application Software

1Load the Passport 4460 Release 4.1 software onto your TFTP server (boot and application code as required).

2Access the CLI (it may be necessary to do this through a Telnet session).

3Download the boot code (if necessary). Otherwise, skip this step. Example:

Download base image specific 192.168.15.30 “bt41xxxx.bld”. This will download the file bt41xxxx.bld from the TFTP host with the IP address 192.168.15.30 (where x’s represent the current version/filename).

4Download the Release 4.1 application code onto the Passport 4460 unit using TFTP.

a Commit the application code bank that will be write-protected during the download

Example:

CLI> set system firmware commitcodebank bank 1

This will write-protect application code bank 1. The application code will be downloaded into bank 2.

bDownload the application code, Example:

CLI> download base image specific 192.168.15.30 “pr41xxxx.bld”

This command downloads the file pr41xxxx.bld from the TFTP host whose IP address is 192.168.15.30 (where x’s represent the current version/filename).

5Commit the new application software to the write-protected bank. Example:

CLI> set system firmware commitcodebank bank2

Getting Started with Passport 4400, Release 4.1

Image 69

Contents Getting Started with Passport 4400, Release Trademarks Copyright 2000 Nortel Networks, IncRestricted Rights Legend Statement of ConditionsLimitations of Remedies EC Declaration of ConformityTechnical Data Safety Warnings and CautionsWarnungAvertissement Technische Daten Donnees TechniquesNotification of Canadian Requirements Notification of FCC Requirements209664-A Contents Chapter Accessing the CLI and Basic Configuration Index Contents 209664-A Chapter Introduction Unpacking the Unit List of DocumentationPassport software license Device Management Tools Determining Which Management Tool to UsePassport 4400 Install Network Management Tools Pmdm Introduction 209664-A Chapter Online Documentation Accessing the Online DocumentationOpen the documentation For installing documentation from the CD-ROMNavigating Online Documentation Online Documentation Site Map Online Documentation Printing Online Documentation Browsers Browser How to Get Optimum Results Operation Passport 4400 Rel Software Online Documentation 209664-A Chapter Hardware Setup If you are using You needWorkstation Requirements If you are using Refer to Installing Passport 4460 HardwareChapter Configurator Procedure for Creating a Node Profile Accessing the Configurator Through a Web Browser Viewing Node Profile Information Defining a Unique DNA Prefix Click on ConfigureDefining a Node ID on Defining a Customer ID on Defining a Node NameDefining a Node ID Defining a Customer ID Resetting the UnitSetting the DNA Numbering Plan Overriding the DNA Numbering Plan Passport 4400 Configurator Documentation URL UpdateSetting the System Clock Configurator Procedure for Creating a Node Profile Configurator Procedure for Creating a Node Profile 209664-A Using a Terminal Chapter Accessing the CLI and Basic ConfigurationCommunication Parameter Set-Up Requirements Accessing the CLI and Basic Configuration Hardware in the flow control field Logging into the CLI Using the Terminal Emulation ProgramAssigning the IP Address Parameter Range of Values Required Actions Chapter CLI Procedure for Creating a Node Profile CLI Procedure for Creating a Node Profile Parameter Range of Values Required Action Defining Node ID on Defining Customer ID on Defining Node ID Defining Customer IDParameter Range of Value Required Action Saving the Current Configuration and Resetting the Unit Confirming the New ConfigurationSetting the System Clock CLI Procedure for Creating a Node Profile IfIndex Overview Appendix a IfIndexes and Interface IdentificationHard-Coded IfIndexes Reserved IfIndexes and RangesIfIndex Description Safe IfIndex Ranges IfIndex RangesIfIndex Table Display Description Configurator Procedure for Displaying the IfIndex TableCLI Procedure for Displaying the IfIndex Table IfIndex IfExtTypeSlot PPA Number IfIndex Table Display DefinitionsChannel Number Slot NameAppendix a IfIndexes and Interface Identification 209664-A Application Code Appendix B Installing System Software from the CD-ROM Downloading Application Software Configurator Procedure for Downloading Application SoftwareCommit the Application Code Bank Select Administration and Code BankSave the Current Configuration and Reset the Unit CLI Procedure for Downloading Application Software Appendix B Installing System Software from the CD-ROM Babt CSA FCC TUV IndexIndex Index Index 209664-A