Nortel Networks 4400, RELEASE 4.1 Installing Passport 4460 Hardware, If you are using Refer to

Page 30

30Chapter 3 Hardware Setup

Installing Passport 4460 Hardware

The next four steps must be executed before you can operate your Passport 4460 unit.

Installation information can be found in the Reference for Passport 4460

Hardware, (205677-A).

1Install the Flash card, Chapter 4

2Attach the interface cables, Chapter 6 (also refer to Reference for Passport 4400 Cables, 205678-A)

3Connect the workstation, Chapter 7

4Power up your Passport 4460 unit, Chapter 1

In Chapter 1 of this manual, you were asked to evaluate the device management tools you are going to use. Refer to the table below and then go to the next procedure.

If you are using....	Refer to....

Passport 4400 Configurator	Chapter 4 of this manual

Command Line Interface (CLI)	Chapters 5 and 6 of this manual

Install Tool	Using Passport 4400 Install Tool Version
	4.1, 206906-B

Mass Deployment and Reporting Tool	Using the Passport 4400 Mass Deployment
	and Reporting Tool, 209665-A

If you are using any of the network management tools, refer page 16 and page 17.

Also note that the Configuring and Operation Passport 4400 Rel. 4 Software will be a good source of product and parameter information as you configure your unit.

209664-A

Image 30

Contents Getting Started with Passport 4400, Release Restricted Rights Legend Copyright 2000 Nortel Networks, IncTrademarks Statement of ConditionsEC Declaration of Conformity Limitations of RemediesWarnungAvertissement Safety Warnings and CautionsTechnical Data Technische Daten Donnees TechniquesNotification of FCC Requirements Notification of Canadian Requirements209664-A Contents Chapter Accessing the CLI and Basic Configuration Index Contents 209664-A Chapter Introduction List of Documentation Unpacking the UnitPassport software license Determining Which Management Tool to Use Device Management ToolsPassport 4400 Install Network Management Tools Pmdm Introduction 209664-A Accessing the Online Documentation Chapter Online DocumentationFor installing documentation from the CD-ROM Open the documentationNavigating Online Documentation Online Documentation Site Map Online Documentation Printing Online Documentation Browsers Browser How to Get Optimum Results Operation Passport 4400 Rel Software Online Documentation 209664-A Chapter Hardware Setup If you are using You needWorkstation Requirements Installing Passport 4460 Hardware If you are using Refer toChapter Configurator Procedure for Creating a Node Profile Accessing the Configurator Through a Web Browser Viewing Node Profile Information Click on Configure Defining a Unique DNA PrefixDefining a Node Name Defining a Node ID on Defining a Customer ID onDefining a Node ID Resetting the Unit Defining a Customer IDSetting the DNA Numbering Plan Passport 4400 Configurator Documentation URL Update Overriding the DNA Numbering PlanSetting the System Clock Configurator Procedure for Creating a Node Profile Configurator Procedure for Creating a Node Profile 209664-A Chapter Accessing the CLI and Basic Configuration Using a TerminalCommunication Parameter Set-Up Requirements Accessing the CLI and Basic Configuration Logging into the CLI Using the Terminal Emulation Program Hardware in the flow control fieldAssigning the IP Address Parameter Range of Values Required Actions Chapter CLI Procedure for Creating a Node Profile CLI Procedure for Creating a Node Profile Parameter Range of Values Required Action Defining Node ID on Defining Customer ID on Defining Node ID Defining Customer IDParameter Range of Value Required Action Confirming the New Configuration Saving the Current Configuration and Resetting the UnitSetting the System Clock CLI Procedure for Creating a Node Profile Appendix a IfIndexes and Interface Identification IfIndex OverviewHard-Coded IfIndexes Reserved IfIndexes and RangesIfIndex Description IfIndex Ranges Safe IfIndex RangesConfigurator Procedure for Displaying the IfIndex Table IfIndex Table Display DescriptionCLI Procedure for Displaying the IfIndex Table IfIndex IfExtTypeSlot IfIndex Table Display Definitions PPA NumberSlot Name Channel NumberAppendix a IfIndexes and Interface Identification 209664-A Appendix B Installing System Software from the CD-ROM Application CodeConfigurator Procedure for Downloading Application Software Downloading Application SoftwareSelect Administration and Code Bank Commit the Application Code BankSave the Current Configuration and Reset the Unit CLI Procedure for Downloading Application Software Appendix B Installing System Software from the CD-ROM Index Babt CSA FCC TUVIndex Index Index 209664-A