54Chapter 6 CLI Procedure for Creating a Node Profile
Example:
CLI> define msm profile customerID 9265
Confirming the New Configuration
To confirm your new configuration, use the following CLI command line:
CLI> show msm profile
A table similar to the following is displayed:
NodeID | 1 (operational) |
| 23 (configured) |
Customer ID | 0 (operational) |
| 9265 (configured) |
DNAPrefix | “[x121]” (operational) |
| “[x121]123456789012” (configured) |
|
|
Any changes that have been made to the node ID, customer ID, and DNA prefix will show up as configured in the display above.
Saving the Current Configuration and Resetting the Unit
To save and reset the unit, use the following CLI command line:
CLI> save configuration update
CLI> reset system current reset
After saving the current configuration and resetting the Passport 4460 unit, use the CLI command, show msm profile to view your changes. The NodeID, Customer ID, and DNAPrefix parameters should display as operational and configured.