Appendix A IfIndexes and Interface Identification 61
CLI Procedure for Displaying the IfIndex Table
The following sample display is taken from a Passport 4460 with two expansion modules installed, an ISDN BRI S/T Voice module and a T1 Voice module. Below is a partial display of the IfIndex Table using CLI.
CLI> show system IfIndex Operational
IfIndex | IfExtType | PPA | Slot |
|
|
|
|
1 | ethernetCsmacd | 0 | base |
2 | propVirtual | 0 | base |
3 | other | 0 | base |
4 | propVirtual | 1 | base |
5 | isdns | 1 | exp1 |
6 | ds0 | 1 | exp1 |
7 | ds1 | 0 | exp2 |
8 | other | 0 | exp2 |
9 | other | 0 | exp2 |
10 | other | 0 | exp2 |
11 | other | 0 | exp2 |
12 | other | 0 | exp2 |
13 | other | 0 | exp2 |
14 | other | 0 | exp2 |
15 | other | 0 | exp2 |
16 | other | 0 | exp2 |
|
|
|
|
Getting Started with Passport 4400, Release 4.1