Nortel Networks 4400, RELEASE 4.1 manual Parameter Range of Values Required Actions

Page 48

48Chapter 5 Accessing the CLI and Basic Configuration

5Use the following CLI command to assign the IP address: CLI> add ip address entry

Parameter

Range of Values

Required Actions

 

 

 

<IfIndex>

INTEGER (1..255)

Enter the IfIndex of the Interface

 

 

displayed in Step .

<IPAddress>

IPAddress

Enter the IP address you want to

 

 

assign the Passport 4460.

<NetMask>

Sub-NetMask

Enter the subnet mask. The bits of the

 

(255.255.255.0,

subnet mask are set to 1 if the

 

255.255.0.0, or

Passport 4460 should treat the

 

255.0.0.0)

corresponding bit in the IP address as

 

 

part of the IP network prefix.

<BcastAddress>

IPAddress

The IP address used for broadcasting.

 

 

 

Example:

CLI> add ip address entry 3 192.168.22.22 255.255.0.0 192.168.255.255

6Save the configuration and reset the unit. CLI> save configuration update

CLI> reset system current reset

209664-A

Image 48
Contents Getting Started with Passport 4400, Release Copyright 2000 Nortel Networks, Inc TrademarksRestricted Rights Legend Statement of ConditionsEC Declaration of Conformity Limitations of RemediesSafety Warnings and Cautions Technical DataWarnungAvertissement Technische Daten Donnees TechniquesNotification of FCC Requirements Notification of Canadian Requirements209664-A Contents Chapter Accessing the CLI and Basic Configuration Index Contents 209664-A Chapter Introduction List of Documentation Unpacking the UnitPassport software license Determining Which Management Tool to Use Device Management ToolsPassport 4400 Install Network Management Tools Pmdm Introduction 209664-A Accessing the Online Documentation Chapter Online DocumentationFor installing documentation from the CD-ROM Open the documentationNavigating Online Documentation Online Documentation Site Map Online Documentation Printing Online Documentation Browsers Browser How to Get Optimum Results Operation Passport 4400 Rel Software Online Documentation 209664-A Chapter Hardware Setup If you are using You needWorkstation Requirements Installing Passport 4460 Hardware If you are using Refer toChapter Configurator Procedure for Creating a Node Profile Accessing the Configurator Through a Web Browser Viewing Node Profile Information Click on Configure Defining a Unique DNA PrefixDefining a Node Name Defining a Node ID on Defining a Customer ID onDefining a Node ID Resetting the Unit Defining a Customer IDSetting the DNA Numbering Plan Passport 4400 Configurator Documentation URL Update Overriding the DNA Numbering PlanSetting the System Clock Configurator Procedure for Creating a Node Profile Configurator Procedure for Creating a Node Profile 209664-A Chapter Accessing the CLI and Basic Configuration Using a TerminalCommunication Parameter Set-Up Requirements Accessing the CLI and Basic Configuration Logging into the CLI Using the Terminal Emulation Program Hardware in the flow control fieldAssigning the IP Address Parameter Range of Values Required Actions Chapter CLI Procedure for Creating a Node Profile CLI Procedure for Creating a Node Profile Parameter Range of Values Required Action Defining Node ID on Defining Customer ID on Defining Node ID Defining Customer IDParameter Range of Value Required Action Confirming the New Configuration Saving the Current Configuration and Resetting the UnitSetting the System Clock CLI Procedure for Creating a Node Profile Appendix a IfIndexes and Interface Identification IfIndex OverviewHard-Coded IfIndexes Reserved IfIndexes and RangesIfIndex Description IfIndex Ranges Safe IfIndex RangesConfigurator Procedure for Displaying the IfIndex Table IfIndex Table Display DescriptionCLI Procedure for Displaying the IfIndex Table IfIndex IfExtTypeSlot IfIndex Table Display Definitions PPA NumberSlot Name Channel NumberAppendix a IfIndexes and Interface Identification 209664-A Appendix B Installing System Software from the CD-ROM Application CodeConfigurator Procedure for Downloading Application Software Downloading Application SoftwareSelect Administration and Code Bank Commit the Application Code BankSave the Current Configuration and Reset the Unit CLI Procedure for Downloading Application Software Appendix B Installing System Software from the CD-ROM Index Babt CSA FCC TUVIndex Index Index 209664-A