Nortel Networks 4400, RELEASE 4.1 manual Hard-Coded IfIndexes, Reserved IfIndexes and Ranges

Page 58

58Appendix A IfIndexes and Interface Identification

Hard-Coded IfIndexes

The following IfIndex numbers are hard-coded, representing the interfaces that are initially present in the Passport 4460.

IfIndex

Description

 

 

1

Logical Ethernet interface for routed LAN traffic

2

Virtual port for WAN traffic

3

Logical Ethernet interface for bridged LAN traffic

4

Virtual port for network management traffic

 

 

Reserved IfIndexes and Ranges

The Passport 4460 also reserves IfIndexes for available ports on the base module and expansion data modules. By reserving these IfIndexes, the Passport 4460 guarantees that a specific port always uses the same IfIndex. For instance, Port 1 always uses IfIndex 150 to refer to the physical interface.

The following table lists IfIndexes that are reserved for use by the ports located on the base module.

Port Number

IfIndex - Physical Port

IfIndex - Connector IfIndex - Service

 

 

 

 

1

150

151

152

2

153

154

155

3

156

157

158

 

 

 

 

There are three reserved IfIndexes associated with each port. For Port 1, IfIndex 150 refers to the physical port interface, 151 refers to the connector interface, and 152 refers to the frame relay service.

209664-A

Image 58
Contents Getting Started with Passport 4400, Release Restricted Rights Legend Copyright 2000 Nortel Networks, IncTrademarks Statement of ConditionsEC Declaration of Conformity Limitations of RemediesWarnungAvertissement Safety Warnings and CautionsTechnical Data Technische Daten Donnees TechniquesNotification of FCC Requirements Notification of Canadian Requirements209664-A Contents Chapter Accessing the CLI and Basic Configuration Index Contents 209664-A Chapter Introduction List of Documentation Unpacking the UnitPassport software license Determining Which Management Tool to Use Device Management ToolsPassport 4400 Install Network Management Tools Pmdm Introduction 209664-A Accessing the Online Documentation Chapter Online DocumentationFor installing documentation from the CD-ROM Open the documentationNavigating Online Documentation Online Documentation Site Map Online Documentation Printing Online Documentation Browsers Browser How to Get Optimum Results Operation Passport 4400 Rel Software Online Documentation 209664-A If you are using You need Chapter Hardware SetupWorkstation Requirements Installing Passport 4460 Hardware If you are using Refer toChapter Configurator Procedure for Creating a Node Profile Accessing the Configurator Through a Web Browser Viewing Node Profile Information Click on Configure Defining a Unique DNA PrefixDefining a Node Name Defining a Node ID on Defining a Customer ID onDefining a Node ID Resetting the Unit Defining a Customer IDSetting the DNA Numbering Plan Passport 4400 Configurator Documentation URL Update Overriding the DNA Numbering PlanSetting the System Clock Configurator Procedure for Creating a Node Profile Configurator Procedure for Creating a Node Profile 209664-A Chapter Accessing the CLI and Basic Configuration Using a TerminalCommunication Parameter Set-Up Requirements Accessing the CLI and Basic Configuration Logging into the CLI Using the Terminal Emulation Program Hardware in the flow control fieldAssigning the IP Address Parameter Range of Values Required Actions Chapter CLI Procedure for Creating a Node Profile CLI Procedure for Creating a Node Profile Parameter Range of Values Required Action Defining Node ID on Defining Customer ID on Defining Customer ID Defining Node IDParameter Range of Value Required Action Confirming the New Configuration Saving the Current Configuration and Resetting the Unit Setting the System Clock CLI Procedure for Creating a Node Profile Appendix a IfIndexes and Interface Identification IfIndex OverviewReserved IfIndexes and Ranges Hard-Coded IfIndexesIfIndex Description IfIndex Ranges Safe IfIndex RangesConfigurator Procedure for Displaying the IfIndex Table IfIndex Table Display DescriptionIfIndex IfExtType CLI Procedure for Displaying the IfIndex TableSlot IfIndex Table Display Definitions PPA NumberSlot Name Channel NumberAppendix a IfIndexes and Interface Identification 209664-A Appendix B Installing System Software from the CD-ROM Application CodeConfigurator Procedure for Downloading Application Software Downloading Application SoftwareSelect Administration and Code Bank Commit the Application Code BankSave the Current Configuration and Reset the Unit CLI Procedure for Downloading Application Software Appendix B Installing System Software from the CD-ROM Index Babt CSA FCC TUVIndex Index Index 209664-A