APC 60-80kW manual See .2 in this guide for System configuration

Options/Accessories

##Delay programmable in configuration stack: “Common fault delay”. Settings 0,10,20,30 seconds.

See section 5.2 in this guide for System configuration

NOTICE!Alarm Trigging Events 1-2- 3-9-10-11-13 activates the corresponding alarm relay after the delay.

Alarm Trigging Events 4-5-6-7-8-12-14-15 activates the corresponding alarm relay momentarily.

Common fault relay 16 is activated at the same time as relay 1-2-3-4-5-6-7-12-13-14-15, or in any of the below situations:

•Internal power supply fault

•System locked in operation mode

•Internal memory fault

•Internal communication fault

990-4051

Installation Guide APC Silcon 60-80kW 400V UPS 61