SEAL 6500 owner manual M I N At O R F E At U R E S, Features

Page 11

L A M I N AT O R F E AT U R E S

3

2

4

 

 

 

 

 

 

 

 

 

 

6

5

 

7

 

 

 

 

 

1

12

Features

10

11

8

9

Figure 4. Laminator Features

1.Control panel system

•For independent control of pressure, temperature and read-out of speed and material usage.

2.Shim Wheels (4)

•Dial-in roller height adjustment for fast and accurate roller nip set ting, which adjusts for the thickness of the material to be processed.

3.Integral Braking System

•A simple braking system with a knurled collar provides the means of adjusting the brake tension for the films and images. Fitted on both the roll easel shaft and the four unwind shafts.

4.Swing-Out Autogrip Unwind Shafts (4)

•Easy loading and positioning of materials. No need for manual lock ing keys. Suitable for rolls wound onto a 3" ID core.

5 Autogrip Wind-Up Idlers (4)

•Removable shafts for winding up the release liner, finished images or other laminate material. Use with 3" ID spare cores.

6.Top Motor Control Panels

•Controls in-feed direction and processing speed from all four corners.

7.Interchangeable In-Feed Tables (For North America/UK):

•User preference for flat table with image guide or print guide table, interchangeable from front to rear of laminator. For ROW the laminator is equipped with flat tables, front and back.

8.Emergency Stop Buttons (4)

•Immediately ceases the laminator’s operation and raises the rollers.

9.Autogrip Roll Easel Shaft

•Removable media unwind shaft for images on a roll. Allows for roll- to-roll laminating in continuous operation when used with the wind-up idler. Interchangeable from front to rear of laminator.

10.Foot-Operated Emergency Tap Switches (2) (Auxiliary Stop)

•Immediately ceases the laminator’s operation and raises the rollers.

11.Covered Foot Switches (2)

•Allows for complete user control when initially feeding in an image.

12.Door Interlock

•Automatically shuts the laminator power off when the Door Interlock switch is turned to the Off position.

**Bi-Directional Operation

•Eliminates the need for cool-down allowing quick application changeovers.

**Dual-Position Cooling Tube

•Offers quick and uniform cooling for smooth, flat output during heat-activated processes. Can be positioned above or below the chill idlers and can be rotated to direct airflow as desired.

**Drive System

•Heavy-Duty Clutch and simplified drive system – Provides smoother performance at all speeds and different film thickness.

**Heating Elements

•Electric High-Wattage Heating Elements and Temperature Controls with Infrared Temperature Sensors – provide for rapid, even heating to 275°F (135°C) and maximum accuracy.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Image 6500 Laminator Page T R O D U C T I O N Statement of Intended USEE C T R I C a L S P E C I F I C AT I O N S Connecting Your LaminatorR K S PA C E R E Q U I R E M E N T S MediaWater and Moisture Ambient TemperaturePower Supply Relative HumidityPA C K I N G , S E T- U P a N D I N S TA L L AT I O N Accessories IncludedLeveling Your Laminator Unpacking Your LaminatorElectrical Parts Danger of being injured by electricity Servicing and Replacement PartsRotating Parts Risk of Injury Hot Surface Risk of Injury on ContactDoor Interlock F E T Y F E AT U R E SM I N AT O R F E AT U R E S FeaturesFront Control Panel O N T C O N T R O L PA N E LBack Control Panel C K C O N T R O L PA N E LU T C H C O N T R O L PA N E L AIR Pressure GaugeAIR Regulator Knob Forward Roller Direction Switch Speed Adjustment KnobReverse Roller Direction Switch Motor Stop SwitchCheck the Heater Controls Check the Main PowerCheck the Motor and Foot Switches Check the Emergency Stop ButtonsT- U P a N D O P E R AT I O N Temperature SettingsHOW to SET the Shim Wheels Shim Wheel SettingsLoading a Roll of Material Unwind shaft cord adjustmentPivoting Roll Easel Bracket Down Pivoting Table USE for WebbingTo insert the cooling tube in the top location Setting the Unwind Brake TensionCooling System To remove the cooling tube from the bottom locationRotation of the Rollers will Stop When Foot Switch OperationAUTO-RUN Operation E D I N G I M a G E S Using the Print Guide TableUsing the Roll Easel Attachment Basic Steps to Feeding ImagesB B I N G F I L M S W I T H O U T a R E L E a S E L I N E R You are now ready to feed imagesB B I N G F I L M S W I T H a R E L E a S E L I N E R YOU are NOW Ready to Feed ImagesFilms Webbing SettingsWebbing for Decaling Pressure-sensitive films Media Ink Jet, Electrostatic, and PhotographicU N T I N G To Mount Decals Onto a SubstrateFront C a P S U L AT I N GE C O AT I N G B O a R D S PreparationWebbing for Vinyl Transfer Media ElectrostaticWebbing Settings Front Control Panel SettingsBack Control Panel Settings Motor Control Panel SettingsE a N I N G / M a I N TA I N I N G Y O U R L a M I N AT O R Cleaning the LaminatorCleaning the Rollers Greasing the BearingsR I O D I C M a I N T E N a N C E S H E E T Chain Tension Drain Water Adjustment/Oil Chain Air FilterGrease Bearings Technical Service Problem SolutionLED PA R E PA R T S L I S T Order Codes MechanicalProcess ElectricalM I T E D W a R R a N T Y
Top Page Image Contents