Epson 60 manual Resetting the Printer, Selecting the Cassette for Computer Printing

RESETTING THE PRINTER

You may need to reset the printer sometimes.

1.Make sure that the machine is in printer READY: mode.

Note: If the machine is in fax standby mode, press

BASIC OPERATIONS

Function 3 5 Yes .

2.Hold the button down for several seconds. RESET appears on the display and all printer settings are returned to their previously stored settings.

If you continue to press the button after RESET appears, INITIALIZE will appear on the display, and the printer settings will return to the power-up default settings.

Caution: If you reset the machine while it is printing, the current page will be printed, but other data remaining in the printer’s memory will be discarded.

If the printer is in Individual Multi-user mode: You can specify which channel to re - set. The display will be as follows if you reset the machine.

❐To reset the parallel channel, press , or to reset the serial channel, press .

❐If you do not wish to reset any channel, press to exit from the reset procedure.

If the printer is in Autosense Multi-user Mode: You can only reset the channel that was displayed on the screen immediately before you reset the printer.

❐See page 13 for details on your printer’s multi-user modes.

❐For more on initializing the printer, see page 54.

SELECTING THE CASSETTE FOR COMPUTER PRINTING

If you have installed an optional paper feed unit (assuming your machine can accept an extra cassette), you can use the following procedure to select which cassette is used when you print a file from your computer.

1. Make sure that the machine is in standby mode, ready for fax communication.

2.

Function 3 6 Yes

3.Either:

❐Select the standard cassette: 1 Yes

❐Select the optional paper feed unit: 2 Yes

The machine returns to standby mode for fax communication.

15