ADJUSTING THE PRINTER SETTINGS
Level 2 Features
One of the following features appears in the display when you enter Level 2. Use the 
and 
keys to scroll through the list until you see the feature that you need to use.
(To return to the printer "Ready" display, press 
repeatedly.)
TEST PRINT: Use this to print a test pattern.
MODE ASSIGN: Use this to select an emulation mode.
I/F CONFIG.: Use this to change the configuration of the serial and parallel channels.
CH: If you are connecting your printer to more than one computer, use the CH feature to allocate memory to each channel.
CH TIMEOUT: Use this to define the channel timeout. If no data is sent during the specified time period, the printer switches to the other channel.
AUTO CONT.: If you switch Auto Continue on, the printer will continue printing when certain types of error are detected.
FACTORY RESET: Use this to reset all Level 1 and 2 settings to the factory settings.
VERSION: Use this to check the version numbers of the printer control software and fonts.
PAGE COUNTER: This counter only gives the total number of pages made by the printer. For a count of the pages made by your machine, including faxes and computer printouts, use the counter feature described in your fax machine’s Operator’s Manual. STANDBY: Do not use this feature.
See Appendix E for a more detailed list of these features and their possible settings.
22