Toshiba BSX4TGS20QMR, B-SX4T Series owner manual On Line Mode, Operation Panel

Page 28

3. ON LINE MODE

ENGLISH VERSION EO1-33034

3.1 Operation Panel

3. ON LINE MODE

3.1 Operation Panel

This chapter describes usage of the keys on the Operation Panel in On Line mode.

When the printer is in On Line mode and connected to a host computer, the normal operation of printing images on labels or tags can be accomplished.

∙The figure below illustrates the operation panel and key functions.

	LCD Message Display
		ON LINE LED (Green)
	POWER LED	ERROR LED (Red)
	(Green)	ERROR LED (Red)
	(Green)

[FEED] key

[RESTART] key

[PAUSE] key

NOTE:

Flashes only when the Ribbon Near End Detection function is selected.

NOTE:

Use the [RESTART] key to resume printing after a pause, or after clearing an error.

The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the printer’s current status. Up to 32 characters can be displayed on two lines.

There are three LED lights on the operation panel.

LED	Illuminates when…	Flashes when…
POWER	The printer is turned on.	-----
ON LINE	The printer is ready to	The printer is
	print.	communicating with
		your computer.
ERROR	Any error occurs with	The ribbon is nearly
	the printer.	over. (See NOTE.)

There are three keys on the operation panel.

PAUSE	Used to stop printing temporarily.
RESTART	Used to restart printing.
FEED	Used to feed the media.

E3- 1

Image 28

Contents SX4T Series CE Compliance for EU only VorsichtWkhsoxj Precautions Request Regarding MaintenanceTable of Contents EA1-1 EA2-1EA3-1 EA4-1Product Overview Introduction FeaturesUnpacking Accessories Dimensions AppearanceFront View Rear ViewOperation Panel InteriorPrinter Setup PrecautionsProcedure before Operation Connecting the Cables to Your Printer GoriConnecting the Power Cord Turning on the Printer Turning the PrinterTurning OFF the Printer Loading the Media Do not over-tighten the Locking Ring of the Supply Holder Setting the Feed Gap Sensor position Setting the Black Mark Sensor positionStrip mode Batch modeSTANDARD/PEEL OFF position Build-in rewinder mode Cut modeLoading the Ribbon Auto Ribbon Saving Mode Pcmcia Cards 3517 Test Print$5&2 Test Print Sample of the bar code test print label On Line Mode Operation PanelOperation Reset Dump Mode Cleaning MaintenancePrint Head/Platen/ Sensors Covers and Panels Care/Handling of the Media and Ribbon Optional Cutter ModuleTroubleshooting Error MessagesError Messages Problems/Causes Solutions Restart keyError Messages Problems/Cause Solutions Possible ProblemsPossible Problems Causes Solutions Removing Jammed Media Do not use any tool that may damage the Print HeadThreshold Setting Threshold setting procedureA1.1 Printer Appendix 1 SpecificationsModel A1.2 Options A1.3 MediaA1.3.1 Media Type LabelA1.3.2 Detection Area of the Transmissive Sensor LabelA1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective SensorTag paper with square holes A1.4 Ribbon Figure below shows the effective print area on the mediaSymbols in the message Appendix 2 Messages and LedsFollowing message appears Appendix 3 Interface „Interface CablesAppendix 4 Print Samples Interleaved 2 CODE39 Standard JAN13, EAN13EAN13+2 digits EAN13+5 digits CODE39 Full AsciiUPC-A+5 digits Industrial 2RSS-14 RSS-14 Stacked RSS LimitedGlossaries Bar codePrint head element USB Universal Serial BusIndex Index Page EO1-33034B