3. ON LINE MODE
ENGLISH VERSION
3.2 Operation
3.2 Operation
3.3 Reset
NOTE:
If the [RESTART] key is held for less than 3 seconds when the printer is in an error or pause state, the printer restarts printing. However, when a communication error or command error occurs, the printer returns to an idle condition.
When the printer is turned on, the “ON LINE” message appears on the LCD Message Display. It is shown during standby or normal printing.
1.The printer is turned on, standing by, or printing.
21/,1( %6;79$
2.If any error occurs during printing, an error message appears. The printer stops printing automatically. (The number on the right side shows the remaining number of media to be printed.)
123$3(5 %6;79$
3.To clear the error, press the [RESTART] key. The printer resumes printing.
21/,1( %6;79$
4. If the [PAUSE] key is pressed during printing, the printer stops printing temporarily. (The number on the right side shows the remaining number of media to be printed.)
3$86(
%6;79$
5.When the [RESTART] key is pressed, the printer resumes printing.
21/,1( %6;79$
A reset operation clears the print data sent from the computer to the printer, and returns the printer to an idle condition.
1.The printer is turned on, standing by, or printing.
21/,1( %6;79$
2.To stop printing, or clear the data sent from the computer, press the [PAUSE] key. The printer stops printing.
3$86( %6;79$
3.Press and hold the [RESTART] key for 3 seconds or longer.
!5(6(7
4.Press the [PAUSE] key. The data sent from the computer will be cleared, and the printer returns to an idle condition.
21/,1( %6;79$
E3- 2