2. PRINTER SETUP
ENGLISH VERSION
2.6 Opening/Closing the Top Cover
2.6Opening/Closing the Top Cover
WARNING!
To avoid injury, be careful not to trap your fingers while opening or closing the cover.
CAUTION!
1.Be careful not to touch the Print Head Element when opening the Top Cover.
Failure to do this may cause missing dots by static electricity or other print quality problems.
2.Do not cover the Cover Open Sensor with your finger, hand, etc. Doing so may cause the sensor to wrongly detect a cover close state.
When opening or closing the Top Cover, please be sure to follow the instructions below.
To open the Top Cover:
1.Press down the Top Cover Release Button to unlock the Top Cover, then fully open the Top Cover.
Top Cover
Top Cover
Release Button
As the Top Cover is held by the damper, it does not close under its own weight.
NOTE:
Be sure to close the Top Cover completely. Failure to do this may affect the print quality.
To close the Top Cover:
1.Press down the portions of the Top Cover indicated by the arrows until they click into position.
Top Cover
E2- 6