Toshiba B-EV4D owner manual How to Use an SD Card, Inserting an SD Card, Removing an SD Card

Page 28

2. PRINTER SETUP

ENGLISH VERSION EO1-33088

2.9 How to Use an SD Card

2.9How to Use an SD Card

CAUTION!

1.Turn off the printer before inserting or removing an SD card. Failure to do this may destroy the data in the SD card.

2.Do not turn off the printer during access to the SD card, as doing so may destroy the data in the SD card.

3.For handling of the SD card, refer to the instruction supplied with the SD card.

This printer enables you to save print formats, writable characters, True Type fonts, etc. in commercially available SD cards.

For available SD card types, please ask the nearest TOSHIBA TEC representative.

For how to save data in an SD card, please refer to the External Equipment Interface Specification stored in the CD-ROM.

Inserting an SD Card

1.Turn off the printer and open the SD card slot cover.

2.Hold an SD card with the print surface facing up, and insert it into the SD card slot until it clicks.

SD Card Slot

Cover

SD Card

3.Close the SD card slot cover.

Removing an SD Card

1.Confirm no access is made to the SD card, and turn off the printer.

2.Open the SD card slot cover.

3.Push the SD card. The SD card pops up.

4.Remove it from the slot, and close the SD card slot cover.

E2-17

Image 28

Contents EV4D Series CE Compliance for EU only VorsichtSafety Summary Meanings of Each SymbolPrecautions Request Regarding MaintenanceTable of Contents EA2-1 For EU onlyIntroduction Features Unpacking Accessories Product OverviewWhen purchasing the power cord SVT H05VV-FAppearance Dimensions Front ViewRear View Interior Button and Indicator Lamp Printer statusPrinter Setup PrecautionsTurning the Printer Procedure before OperationTurning on the Printer Turning OFF the Printer Connecting the Cables to the Printer Connecting the Power Adapter and the Power Cord To open the Top Cover Opening/Closing the Top CoverTo close the Top Cover Loading the Media Open the Media Holders 1 Media Sensor Calibration Batch mode Strip mode Option How to set the mediaHow to Load Fanfold Paper Stock Cut mode OptionExternal Media Roll Hanger Option Media Sensor Test, and Dump Mode different type UtilitiesMedia Sensor Calibration Self Print Test and Dump Mode Print test label sampleE2-16 „ Inserting an SD Card How to Use an SD Card„ Removing an SD Card Cleaning MaintenancePrint Head Platen/Sensors Media HousingCover Care/Handling of the Media OptionTroubleshooting Troubleshooting GuideColor Status Cause Solutions Status LampRemoving Jammed Media Appendix 1 Specifications A1.1 PrinterEV4D-TS14-QM-R A1.2 Options A1.3 MediaA1.3.1 Media Type LabelA1.3.2 Detection Area of the Transmissive Sensor A1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective SensorBlack Mark Figure below shows the effective print area on the media Appendix 2 Interface Interface CablesGlossaries Bar codeSupply EO1-33088C