Toshiba TOSNIC-7000S instruction manual Scroll Keys, Scrolls to the previous screen see Figure

Page 50

		6 F 3 H 1 0 0 1
		Table 9.9 Scroll Keys

No.	Name	Description

i	SCROLL UP	Scrolls to the previous screen (see Figure 9.9)

j	SCROLL DOWN	Scrolls to the next screen (see Figure 9.9)

k	RESET	Deletes the stored waveform and failure and warning data
		from the memory card.

(*)

(**)

Remarks

Normal Data

Display screen

Failure Data Display screen

Warning Data Display screen

*See section 7.2.1 (on page 21, Normal Display Screen", for details on the content of the Normal Display screen.)

**i ii , etc. represent the order in which the failures occurred.

Figure 9.9 Changing Screens with Scroll Keys

- 49 -

Image 50

Contents ALL Rights Reserved July3 H 1 0 0 Procedure and the status of the UPS unit Vent type stand-alone lead storage batterySealed stand-alone lead storage battery Synchronized modeExact nature of what must be done is indicated Safety PrecautionsIntroduction 3 H 1 0 0 Safety Precautions UseCards Do not open the rear door Accordance with customer stipulationsDo not touch rotating section Locations of the Warning Labels Example 300 kVABe always Do not turn off Turn on Running Handling Precautions 3 H 1 0 0 Handling Precautions 3 H 1 0 0 Handling Precautions Contents Appearance Example 300 kVAExample 300 kVA C52R D72B E52R F52M G52L H8A I6CH Controls and Circuit ConfigurationPanel Controls This may result in failureCircuit Configuration Fault UPSPanel Keys 3 H 1 0 0 Panel Key-switchKey-switch Function Name Remarks Key Functions For HS or AHH individual battery systems Name Function RemarksPanels Graphic Display Panel2 Graphic Display Panel Control This LED is unlit when the converter has stopped This LED lights up when the UPS is operatingThis LED lights up when the AC input circuit breaker Operating. It blinks when the converter is starting upLCD Display Scroll up Scroll down200V 3 H 1 0 0 Normal Display ScreenNormal Display Screen LCD Screen Description 50 %BYP I/P-V Normal Display Screen60.0Hz 401V52R Trip 3 H 1 0 0 Failure Display ScreenFailure Display Screen LCD Screen Description 98-09-093 H 1 0 0 LCD Screen Switching Operation Operation General Description/Objective Types of OperationPre-operational check Startup Starts up and operates the stopped UPSProcedures StartupMain circuit AC input Circuit breaker 52R When the message Appears, turn onBypass Press ‘RUN’ Switch Bypass Move #52R to ‘ON’ PositionTo finish On page 14 for at least SecondWait several seconds For the startup process Main circuit DC inputHold down the UPS Key g in the Figure → The will start Power supply Changing processUPS power supply On page14 for at3 H 1 0 0 Switch Power Supply UPS → Bypass 3 H 1 0 0 3 H 1 0 0 Stop StopBatteries LED unlit → This complete UPS Shutdown Restart Press ‘RUN’ Switch Shutdown Move #52R to ‘OFF’Breaker72B 3 H 1 0 0 Complete Shutdown Complete ShutdownTurn off the precharge Circuit switch 6CHUsing the scroll keys Wait about 20 minutes Until the DC capacitorChanging From Floating Charge to Equalized Charge Second → Change to floating Charge is complete Changing From Equalized Charge to Floating ChargeCheck to make sure That the Equal Float Charge LED lit Equal Charge LED unlitChanging from Protective Charge to Floating Charge 3 H 1 0 0 Changing the Power Supply to Maintenance Bypass Changing From UPS to maintenance Bypass Power Supply1 Startup Changing From Maintenance Bypass to UPS Power SupplySame as steps 1-4 52R 72B 52C 52M 52LName Description TroubleshootingTypes of Errors 52R Trip 98-09-09 LCD Failure DisplaysFailure Data Screen Failure Data Screen Descriptions↑ indicates there is a warning screen before this screen Up to 10 screens of warning data can be displayedShows the nature of the warning. For details, see Section ↓ indicates there is a warning screen after this screen3 H 1 0 0 Failure Messages Protective Detector LocationsFault Trip LCD Message Description IndicationBattery temperature has risen Bypass input frequency errorIncluding operation error Battery fluid level has gone below prescribed levelFor Individual battery systems. For HS or AHH batteries Position of Scroll Keys in Failure Data ScreensScrolls to the next screen see Figure Scroll KeysScrolls to the previous screen see Figure Procedure Saving WaveformsOnly open the front panel when performing necessary Restoring UPS OperationFailure Data screens 98-09-09 By scrolling with scroll 11 Restoring UPS Operation ExampleAlso check for other Panel

6 F 3 H 1 0 0 1

Table 9.9 Scroll Keys

Name

Scrolls to the previous screen (see Figure 9.9)

Scrolls to the next screen (see Figure 9.9)

Figure 9.9 Changing Screens with Scroll Keys