Toshiba TOSNIC-7000S On page 14 for at least Second, Wait several seconds For the startup process

6 F 3 H 1 0 0 1

Table 8.1 Startup Procedures (continued)

Step	Procedure	LCD/LED Status (After Execution)
7	Hold down the "RUN"
	key (d in Figure 6.3.1		BYPASS
	on page 14) for at least
	0.5 second.		UPS START-UP
		～	～	～	UPS
		AC INPUT	CONVERTER	INVERTER
			FLOAT CHARGE		AC	～
		BATTERIES	EQUAL CHARGE		SWITCH
			DISCHARGE			AC OUTPUT
		～			BYPASS
		BYPASS INPUT
		The "CONVERTER" and "INVERTER" LEDs blinking.
8	Wait several seconds
	for the startup process		BYPASS
	to finish.
			MOVE #72B TO ‘ON’ POSITION
		～	～	～	UPS
		AC INPUT	CONVERTER	INVERTER
			FLOAT CHARGE		AC	～
		BATTERIES	EQUAL CHARGE		SWITCH
			DISCHARGE			AC OUTPUT
		～			BYPASS
		BYPASS INPUT
		The "CONVERTER" and "INVERTER" LEDs lit.
9	When the message
	appears, turn on the		BYPASS
	main circuit DC input		AC-VO	200[V]
	circuit breaker (72B).
			AC- I O	50[%]
			PRESS ‘UPS’ SWITCH
		～	～	～	UPS
		AC INPUT	CONVERTER	INVERTER
			FLOAT CHARGE		AC	～
		BATTERIES	EQUAL CHARGE		SWITCH
			DISCHARGE			AC OUTPUT
		～			BYPASS
		BYPASS INPUT
		The "BATTERIES" and "FLOAT CHARGE" LEDs lit.

- 29 -