Toshiba 1800 manual Storage of UPS Equipment, General Guidelines, Avoid, Before Storing

Page 35

Storage of UPS Equipment

General Guidelines

If the UPS equipment is to be stored; the following guidelines should be used.

Avoid:

1)Storage in sites subject to extreme changes in temperature or high humidity.

2)Storage in sites subject to exposure of high levels of dust or metal particles.

3)Storage on inclined floor surfaces or in sites subject to excessive vibration.

Before Storing:

1)Allow UPS to be operated for 4 hours to ensure that the batteries are fully charged.

2)Stop the unit (see “Stopping the UPS” on page 21).

3)Place the unit’s Input Breaker switch in the “off” position (see “Layout”, page 15).

Storing:

1)Store within a temperature range of -4° to 104°F (-20° to 40° C).

If the UPS is stored at a temperature outside of the allowable operating range, allow time for the unit to reach equilibrium with the ambient temperature before starting the UPS.

2)For best results, store the UPS in the original shipping container and place on a wood or metal pallet.

3)The optimum storage temperature is 70°F (21° C). Higher ambient temperatures cause UPS batteries to need recharging more frequently.

1800 Series User Manual

35

Image 35
Contents Series Page Product Use and Warranty Restrictions Qualified Personnel only Toshiba International Corporation Toshiba’s Customer Support CenterToshiba Customer Support Center Instructions Importantes Concernant LA Sécurité Appendix D Bypass Undervoltage / Overvoltage Preventive MaintenanceGeneral Safety Instructions Important Safety Instructions Instructions Importantes Concernant LA Sécurité Application and Use Power BackupProduct Description Theory of OperationPower Conditioning Unpacking Instructions Inspection/InstallationInstallation Precautions Inspection of the New UPS EquipmentOperating Precautions Layout UPS Power Connections External DimensionsWiring the Unit Terminal Block Details Power Connections 120 V InputH2A H1A LOW COM High Power Connections 208/240 V InputDisplay Panel Layout Operating the UPSOption Starting the UPS SystemStopping the UPS Initial Mode Resultant Mode after Switch to Bypass UPS Display Status and Operating Condition UPS Display Status and Operating Condition Battery Recharge Time Battery Backup TimeFunction Control Button Battery Check FunctionRemote Contacts IBM AS/400 Communication InterfaceCTS RS-232COption Card Slot TroubleshootingOver Heat 100% Flash Sound for Voltage 20% Flash Sound for Frequency 60% Flash Sound for Faults Fault Over Heat 150% Second Before Storing Storage of UPS EquipmentGeneral Guidelines AvoidRecharging requirements during storage DisposalParts Replacement Preventive and Scheduled Maintenance/Parts ReplacementPreventive Maintenance UG1G2L024C6TB Appendix a SpecificationsEvvironmental Physical Battery Appendix B System Overload Appendix C Parallel Operation Appendix D Bypass Undervoltage Overvoltage Appendix E 1800 Model/Wire Size Specifications Toshiba International Corporation Procedure Modifications Page Page Page Page Page Industrial Division
Related manuals
Manual 12 pages 33.79 Kb