Toshiba 1800 manual Important Safety Instructions

Page 9

Important Safety Instructions

SAVE THESE INSTRUCTIONS.

This manual contains important instructions for all models of the Toshiba 1800 Series UPS. These instructions should be followed during the installation and maintenance of the UPS and its batteries.

The maximum ambient temperature in which this UPS unit should be operated or stored is 104°F (40°C). The maximum ambient temperature in which this UPS should charge batteries is 95°F

(35°C).

When changing battery packs, be sure to use the proper model unit.

 

Do not dispose of the batteries in a fire.

Danger

The batteries inside may explode.

Misuse of this equipment could result in human injury Caution and equipment damage. In no event will Toshiba International Corporation be responsible or liable for either indirect or consequential damage or injury

that may result from the use of this equipment.

Do not open or mutilate the batteries. Released Caution electrolyte is harmful to the eyes and skin, and

could be toxic.

This unit contains sealed lead acid batteries. Caution Lack of preventative maintenance could result in batteries exploding and emitting gasses and/or flame. Annual preventative maintenance must be

performed by an authorized, trained technician.

Failure to replace the batteries in accordance with Caution the maintenance schedule may cause the batteries to crack, possibly releasing electrolytes from the battery, and resulting in secondary faults such as

odor, smoke and fire.

1800 Series User Manual

Image 9
Contents Series Page Product Use and Warranty Restrictions Qualified Personnel only Toshiba’s Customer Support Center Toshiba Customer Support CenterToshiba International Corporation Instructions Importantes Concernant LA Sécurité Appendix D Bypass Undervoltage / Overvoltage Preventive MaintenanceGeneral Safety Instructions Important Safety Instructions Instructions Importantes Concernant LA Sécurité Product Description Power BackupTheory of Operation Application and UsePower Conditioning Installation Precautions Inspection/InstallationInspection of the New UPS Equipment Unpacking InstructionsOperating Precautions Layout External Dimensions Wiring the UnitUPS Power Connections Terminal Block Details Power Connections 120 V InputH2A H1A LOW COM High Power Connections 208/240 V InputDisplay Panel Layout Operating the UPSStarting the UPS System Stopping the UPSOption Initial Mode Resultant Mode after Switch to Bypass UPS Display Status and Operating Condition UPS Display Status and Operating Condition Battery Recharge Time Battery Backup TimeFunction Control Button Battery Check FunctionRemote Contacts IBM AS/400 Communication InterfaceCTS RS-232COption Card Slot TroubleshootingOver Heat 100% Flash Sound for Voltage 20% Flash Sound for Frequency 60% Flash Sound for Faults Fault Over Heat 150% Second General Guidelines Storage of UPS EquipmentAvoid Before StoringRecharging requirements during storage DisposalPreventive and Scheduled Maintenance/Parts Replacement Preventive MaintenanceParts Replacement UG1G2L024C6TB Appendix a SpecificationsEvvironmental Physical Battery Appendix B System Overload Appendix C Parallel Operation Appendix D Bypass Undervoltage Overvoltage Appendix E 1800 Model/Wire Size Specifications Toshiba International Corporation Procedure Modifications Page Page Page Page Page Industrial Division
Related manuals
Manual 12 pages 33.79 Kb