2
3 Specify the following items as required and press [OK].
ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable the HTTP network server service. This option must be enabled for using the following functions:
yTopAccess
yThe
y
y
[PRIMARY PORT NUMBER] — The default primary port number “80” is always used. This port number cannot be changed.
ENABLE SSL — Press [ENABLE] to enable SSL for accessing TopAccess and the
To use the
4 Continue to another network setting if required, then press [APPLY NOW].
“NETWORK INITIALIZING” is displayed at the lower left of the screen and this equipment starts initializing the network interface card to apply the changes. This message disappears after it is finished.