Toshiba 203SD manual Gently pull the toner, Cartridge out while pressing the lock release lever

Page 77

 

TROUBLESHOOTING AND MAINTENANCE

3 Gently pull the toner

Toner cartridge lock release lever

cartridge out while pressing the lock release lever.

• After removing the toner cartridge, do not shake it or tap on it. Doing

Note so may cause toner to leak from the cartridge. Put the old cartridge immediately in the bag contained in the box of the new cartridge.

•Dispose of the old toner cartridge in accordance with local regulations.

4 Remove the toner cartridge from the bag. Grasp the cartridge on both sides and shake it horizontally four or five times. After shaking the cartridge, remove the toner seal.

4 or 5 times

Shutter

Toner seal

Grasp the toner cartridge as shown in the illustration. Do not hold the Note cartridge by the shutter. Be sure to only shake the cartridge before the

toner seal is removed.

5 Gently insert the toner cartridge

 

along the guides until it locks in

 

place while pushing the lock release

 

lever. Remove the tape from the

8

shutter. Pull the shutter out of the

toner cartridge as shown in the

illustration. Discard the shutter.

75

Page 76 Page 78
Image 77
Page 76 Page 78
Contents Page Checks Passports Drivers licenses For users in the USAContents User Settings 20 cm 10 cm Important points when selecting an installation siteDo not install your machine in areas that are Environmental Information Software LicenseTrademark acknowledgements For users in the USASafety Precautions Online Manual on the accessory CD-ROM Using the manualIntroduction Conventions used in this manual and online manualEnhanced copying features Main FeaturesHigh-speed laser copying High-quality digital imageColor scanner function LCD panel displays messagesLaser printer function Part Names PreparationsSTUDIO203S Operation panel100% 5x11 DisplayPower on Power on and OFFPower save modes Power offPreheat mode Auto power shut-off modeFor best results, use only Toshiba recommended paper Loading PaperPaper Special papers Follow these guidelines when using special papersLoading the Paper Tray Gently push the paper tray back into the machine Envelopes Important points when inserting paper in the bypass trayOpen the bypass tray and extend the tray Loading paper in the bypass trayPress the Tray Select key to select the bypass tray Print faceFollow these steps to change a trays paper size setting Changing a Trays Paper Size SettingSelect the tray, and then press Press the Menu keyNormal Copying Using the document glassMaking Copies Using the Radf Option Setting a large originalDocument feeder tray without trying Place the originals face upTo force them Originals that cannot be used in the RadfSelecting the Tray Setting the number of copiesPaper output tray extension Paper holder armMaking a Copy Darker or Lighter Fine adjustment of the ratio Selecting a preset ratioREDUCTION/ENLARGEMENT/ZOOM Copy will be delivered to the paper output traySTUDIO203SD only Convenient Copy FunctionsAutomatic TWO-SIDED Copying Using the document glass e-STUDIO203SD only To 1 One-sided copies from two-sided originals Place the originals in the RADF. p.21Press the Enter key Sort appears and then press When all originals have been scanned, press the keySort Copy Offset function during sort copy Place the originals. p.21If the memory becomes full 1 copy Copying Multiple Originals Onto a Single Sheet of PaperORIG. Size Enter Copy is delivered to the paper output tray Place the originals. p.21 Press the E-SORT/SP.FUN key untilMargin shift Creating Margins When CopyingPlace the originals Press the E-SORT/SP.FUN key until Margin Shift appears and then pressMargin Shift on OFF Software Installing the SoftwareMFP driver Desktop Document ManagerHardware and software requirements Before InstallationWindows 98, Windows Me, Windows 2000 Professional*5 Windows XP*5, Windows Vista*5Double-click the setup icon Installing the SoftwareFollow the on-screen instructions Select Connected to this computer and click the Next buttonInstalling the Software This completes the installation of the software When installing is finished, click the Close buttonConnecting a USB cable Select Connected via the network and click the Next button Using the machine as a shared printerWindows Vista, the Add Network Port button does not appear Click the Add Network Port buttonYou will return to the window of . Click the Close button Windows Vista, select Properties from the Organize menu Setting UP Button ManagerWindows XP/Vista Installing the Software Select Toshiba e-STUDIOXXXX and click the Properties button Windows 98/Me/2000Select Toshiba Button Manager T in Send to this application User programs p.58 System requirements for USB 2.0 Hi-Speed modeBasic Procedure for Printing Using the Printer ModeCanceling a print job Make sure that paper is loaded in the trayScanning from the operation panel of the machine Using the Scanner ModeScanning Using the Keys on the Machine Button Manager scan menu Scanning from Your ComputerOperation in COPY, PRINTER, and Scanner Modes Click to read the online manual HOW to USE the Online ManualViewing the online manual User Programs User SettingsCopy mode Power shut-off mode, no keys Than preheat mode if the setCan be used Use this setting to select Layout patterns When enabled, this functionUse this setting to set Speed is selected to enableUsed for printer mode Or increase when held downBe adjusted separately for This is used to adjustFactory default setting for To the factory default settingsOFF Print modePress the Menu key and then press the Enter key Selecting a Setting for a User ProgramChange the setting of the selected item Base setting beep Base settingsOne beep Invalid key beepDisplay Messages Troubleshooting and MaintenanceIndication Cause and remedy Lamp indicator Display Correctly. Reinstall the toner cartridge Toner cartridge is not installedReplacement of toner cartridge will be Error Indicator SteadilyTroubleshooting the Machine Paper Paper is outside of the specified Size and weight range Problem Cause and solution Misfeed occurPaper is not loaded properly Paper misfeedMemory FULL, Press Start to Machine is in auto power shut-offMFP driver cannot be installed Windows 2000/XP Problems During Setup of the SoftwareClick Performance and Maintenance, and then click System Click the start button and then click Control PanelClick Icon beside Universal Serial Bus controllers Plug and play screen does not appearRemoving the software Install the software as explained in InstallingClick Icon beside Other devices Click Add or Remove ProgramsMisfeed Removal Misfeed in the paper feed area Misfeed in the fusing areaSee B Misfeed in the fusing area p.71 Lower the fusing unit release leverMisfeed in the transport area Open the front coverDocument feeder cover Radf jam release lever Misfeed in the Radf OptionToner Cartridge Replacement Cartridge out while pressing the lock release lever Gently pull the tonerToner cartridge lock release lever Or 5 times Shutter Toner sealLockUnlock Scan Head Locking SwitchPress the key or key to display the count of each function Maintenance RequiredChecking the Total Count Wipe the cabinet with a soft, clean cloth Cleaning the MachineCabinet Document glass and the back side of the document coverTransfer charger Optional Equipment Sheet Paper Feed Unit MY-1034 Using the MY-1034 with the printer functionInterface cable USB interface cableAppendix SpecificationsResolution Fusing systemPower supply Power consumptionPrinter Function Scanner Function Sheet paper feed unit MY-1034 Reversing automatic document feeder MR-2019Numerics SymbolsIndex Power off Power on Misfeed removal Fusing areaPower switch Preheat mode Problems during setup of the softwareUser programs Tray Select keyConnecting the computer Using convenient copy functionsTroubleshooting and maintenance PreparationsLuokan 1 Laserlaite Klass 1 Laser Apparat Page For users in the USA TINSE1889QSZZ R080520F8400-TTEC
Related manuals
Manual 4 pages 20.94 Kb Manual 2 pages 46.58 Kb

203S, 203SD specifications

The Toshiba 203S and 203SD are advanced multifunctional printers that epitomize quality, efficiency, and versatility for small to medium-sized businesses. Renowned for their robust performance, these models integrate a range of cutting-edge technologies, making them ideal for organizations that demand high productivity levels and impeccable document management capabilities.

One of the standout features of the Toshiba 203S and 203SD is their impressive print speed. Capable of producing up to 20 pages per minute, these printers ensure that businesses can handle high volume print tasks swiftly and efficiently. The first page out time is remarkably quick, allowing users to start printing almost instantly. With a maximum print resolution of 600 x 600 dpi, the quality of every document is sharp and clear, making them suitable for professional presentations and high-quality reports.

Both models come equipped with advanced scanning capabilities. The Toshiba 203SD, in particular, features a robust document feeder that can handle double-sided scanning, enabling quick digitization of documents without manual intervention. The scanning speed and quality ensure that even complex documents are captured with accuracy, making archival and sharing easier than ever.

Connectivity options on the Toshiba 203S and 203SD are user-friendly and versatile. Both printers support USB and network connectivity, allowing for seamless integration into any office environment. Additionally, they feature wireless printing capabilities, enabling users to print directly from smartphones or tablets through mobile printing applications, facilitating a more dynamic and flexible working atmosphere.

Energy efficiency is another critical feature that Toshiba has prioritized in these models. Both printers are designed to reduce power consumption, particularly in standby mode, helping businesses lower their overall operational costs while contributing to more sustainable practices.

The user interface on the Toshiba 203S and 203SD is intuitive and easy to navigate. The control panel offers quick access to frequently used functions, simplifying the printing, scanning, and copying processes. This ease of use is complemented by enhanced security features, including user authentication to prevent unauthorized access to sensitive documents.

In conclusion, the Toshiba 203S and 203SD are robust printers that provide exceptional functionality for modern office environments. With high print speeds, versatile scanning capabilities, energy-efficient design, and user-friendly interfaces, they present an ideal solution for businesses looking to enhance their document management processes and overall productivity.
Top Page Image Contents