D-Link DRO-210i manual Outbound Policies, IP Permitted Rules, Add Permitted IP Rule

Firewall

Protocol	Select from this drop-down menu the application. This is the
	equivalent of entering the correct Transport Type and the port
	number corresponding to a given application.
Port Range	Enter the range of port numbers for which the current policy
	rules will be applied. If you have only one port number to
	enter, enter it in both fields.
Direction	This is the direction (Inbound) of network traffic for which the
	current policy entry will be applied.

After entering all the information press the Apply button and the Service Permitted Rule table will now be displayed at the bottom of the page. Press the Delete button to delete the corresponding entry.

IP Permitted Rules

In Service Permitted Rule table, click the icon under IP Permitted Rule column to configure Permitted IP Rules.

Web UI

Service

Source IP

Add Permitted IP Rule

Displays the Protocol and Port for which Permitted IP Rule is being configured.

Select Any or IP Range. If IP Range is selected, the administrator can specify a range of IP addresses that the IP filter policy will be applied to. If you have only one IP address that you want to filter, enter this address in both the From and To fields.

Destination IP	Select Any or IP Range. If IP Range is selected, the
	administrator can specify a range of IP addresses that the IP
	filter policy will be applied to. If you have only one IP address
	that you want to filter, enter this address in both the From and
	To fields.
Status	Select Enable or Disable to activate or deactivate the
	configured entry.

After entering all the information press the Apply will now be displayed at the bottom of the page. Delete button for deleting the corresponding entry.

button and the Permitted IP Table Press View button for viewing and

7.1.4 Outbound Policies

The traffic flowing from Trusted to UnTrusted network is the Outbound traffic. By default, all network traffic which flows from Trusted network to UnTrusted network is allowed. Port Filter rules can be added to block specific traffic.

Dlink DRO-210i User Guide 39