D-Link DRO-210i manual MAC Filter, Add Blocked MAC Address, Blocking Log Table

Firewall

After entering all the information press the Apply button and the status table will now be displayed at the bottom of the page. Press Delete button for deleting the corresponding entry.

7.1.7 MAC Filter

MAC Filter feature can be used to block all traffic from a specific user’s system. The user’s system can be uniquely identified by its MAC Address.

In Outbound Policies, select Blocked MAC (under MAC Filter) to go to the Blocked MAC Address configuration page.

Web UI

Add Blocked MAC Address

MAC Address	MAC Address to be blocked
DHCP Client	The MAC Address to be blocked can also be chosen from the
	list of DHCP Clients.

After entering all the information press the Apply button and the status table will now be displayed at the bottom of the page. Press Delete button for deleting the corresponding entry.

7.1.8 Blocking Log

This list shows what traffic has been blocked by the Firewall Policy and the reason for blocking.

Select Status → Log Tables → Blocking Log to view the Blocking Log Table as explained below.

Web UI

Blocking Log Table

Blocking Time	Displays the time when the blocking happened.
Transport Type	Displays the transport type.
Source	Displays the source IP address that was blocked.
Destination	Displays the destination IP that was blocked.
Blocking Reason	Displays the reason why the packet was blocked.

Dlink DRO-210i User Guide 45