D-Link DRO-210i manual Administration, Device Information

Page 63

Administration

Administration

The router provides several administrative features/tools to maintain and monitor the router. This section discusses these features and their configuration in detail.

10.1 Device Information

The current status of the router can be obtained through this page.

Select Status Device Info to view Device Information table as explained below.

Web UI

Device Info

Device Name

Displays the device name.

 

 

Firmware Version

Displays the firmware version used by the router.

 

 

System Up Since

Displays the duration for which the router has been running.

 

 

LAN

 

 

 

LAN Physical Link

Displays if a cable is plugged in (UP) or out (DOWN) on the LAN port.

Status

 

 

 

MAC Address

Displays the MAC address of the LAN port.

 

 

IP Address

Displays the current LAN IP address.

 

 

Subnet Mask

Displays the subnet mask for the LAN IP address.

 

 

DHCP Server

Displays if the router is currently configured as a DHCP server.

 

 

WAN1

 

 

 

WAN1 Physical

Displays if a cable is plugged in (UP) or out (DOWN) on the WAN port.

Link Status

 

 

 

WAN1 Protocol

Displays the operational status of the WAN protocol.

Status

 

 

 

Connection Type

Displays the WAN routing protocol selected (Static, Dynamic or PPPoE).

 

 

IP Address

Displays the current WAN IP address.

 

 

Subnet Mask

Displays the subnet mask for the WAN IP address.

 

 

Default Gateway

Displays the gateway IP address for this interface.

 

 

WAN2

 

 

 

WAN2 Physical

Displays if a cable is plugged in (UP) or out (DOWN) on the WAN port.

Link Status

 

 

 

WAN2 Protocol

Displays the operational status of the WAN protocol.

Status

 

 

 

Dlink DRO-210i User Guide

63

Image 63
Contents DRO-210i Table Of Contents Virtual Private Network Bold About This ManualProduct Overview Product OverviewDlink DRO-210i User Guide Hardware Details DRO-210i Package ContentsFront Panel Rear Panel Routing Software FeaturesVPN Tools Interfaces Port ConfigurationOptional Port Configuration Disabled WAN2/DMZForgot LAN IP ? LAN SettingsLAN Interface DMZ InterfaceDMZ Settings WAN InterfaceMaximum Transmission Unit Dhcp Settings for WAN1 Interface Static ModeDynamic Mode IP Settings for WAN1 InterfaceUnnumbered Interfaces PPPoE ModePPPoE Settings for WAN1 Interface DHCP, DNS and Time DHCP, DNS and TimeDhcp Dhcp ServerDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy DNS Proxy SettingsTime System Time SettingsRouting RoutingStatic Routing Dynamic RoutingStatic Routing RIP Settings Policy Based Routing Routing TablePolicy Based Routing Routing TableTo the same destination High Availability Auto BackupBackup Configuration High AvailabilityLoad Balancing Configuration Load BalancingEthernet Link Detection Ethernet WAN Link Detection NAT NAT Interface ConfigurationNAT Interface Configuration Network Address TranslationNAT Configuration NAT ConfigurationNAT Exception Virtual Server NAT ExceptionVirtual Server/NAPT SIP-ALG SIP ALG ConfigurationNAT Session Table NAT TableFirewall Policies Interface ConfigurationFirewall Interface Configuration FirewallPolicy Rules Policy RulesInbound Policies Permitted ServicesInbound Policies Permitted Services Inbound PoliciesOutbound Policies IP Permitted RulesAdd Permitted IP Rule Outbound Policies Outbound PoliciesAdd Blocked IP Rule Blocked ServicesOutbound Policies Service Blocked Rule IP Blocked RulesTrusted Domain Domain FilterUntrusted Domain Outbound Policies Untrusted DomainActiveX Filter Web FilterJava Filter Cookie FilterKeyword Filter Keyword ExceptionFile Extension Filter Blocking Log Table MAC FilterBlocking Log Add Blocked MAC AddressIntrusion Detection IDS ConfigurationIDS Configuration Black List Table Intrusion LogBlack List Intrusion Log TableVirtual Private Network Virtual Private NetworkIPSec Tunnel IPSec Tunnel or PassthroughPeer-To-Peer IPSec PassthroughVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server IPSec Server ConfigurationsMaximum life duration is 86400 seconds Tunnel Remote ID Configuration Tunnel TableLimitation IPSec Status IPSec StatusIPSec Log Table IPSec LogHTB QoS Configurations Quality of ServiceClass Configuration Quality of ServiceQuality of Service QoS Filter Configurations Filter ConfigurationTOS/DiffServ Type Of Service/DiffServQuality of Service Device Info AdministrationAdministration Device InformationTraffic Statistics Session LogTraffic Statistics System Log Password ChangeSysLog Session LogSystem Change PasswordPassword Recovery SystemUpload/Download Update Firmware/ConfigurationPing Test Remote AccessRemote Access Ping TestAdministration Dlink DRO-210i User Guide Frequently Asked Questions Frequently Asked QuestionsGeneral DHCP, DNS Q6. What is the purpose of Dhcp Server Auto Configuration?High Availability RoutingFirewall Frequently Asked Questions 11.6 NAT 11.7 VPN Q21. What are the call features supported by SIP-ALG?11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.