D-Link DRO-210i manual Sip-Alg, SIP ALG Configuration

Page 34

Network Address Translation

Protocol

Select the appropriate application from the list. This selection is

 

equivalent to entering a correct transport type (TCP or UDP) and port

 

number for an application. For example, when SMTP is chosen transport

 

type TCP and port number 25 is automatically entered.

 

 

Private Settings

 

 

 

IP address

Enter the private IP address of the server that will provide the service to

 

remote users.

 

 

Port

Enter the private port number on which the server is running.

 

 

Global Settings

 

 

 

IP address

Enter the global IP address of the server. External world sees this global

 

IP address specified by the administrator.

 

 

Port

Enter the application port number (global) that is providing the service.

 

 

After entering all the information press the Apply button and the Virtual Server table will now be displayed at the bottom. Each entry can be deleted by selecting the Delete button next to the entry.

6.3 SIP-ALG

Session Initiation Protocol (SIP) packets have IP address embedded in the data packet. So NAT is not fully effective for such applications. SIP ALG enables SIP phones on the LAN side to make calls across the Internet when NAT is enabled.

The administrator needs to configure the port numbers used for SIP by the IP Phone or the SIP Server. A maximum of 20 SIP calls can be active simultaneously.

Caution: If router reboots, SIP Phones need to be reregistered with the external SIP

￿Server. This is because the router does not remember the earlier SIP Registrations on reboot.

Select NAT → SIP-ALGto configure the SIP ALG Configuration as explained below.

Web UI

SIP ALG Configuration

Enable

Select Enable to activate the feature.

 

 

Port number

Enter the port number of the SIP Phone or SIP Server.

 

 

After entering all the information press the Apply button and the SIP ALG Table will now be displayed at the bottom. To delete an entry press the Delete button next to the entry.

Dlink DRO-210i User Guide

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DRO-210i Table Of Contents Virtual Private Network About This Manual BoldProduct Overview Product OverviewDlink DRO-210i User Guide DRO-210i Package Contents Hardware DetailsFront Panel Rear Panel Software Features RoutingVPN Tools Disabled WAN2/DMZ Port ConfigurationOptional Port Configuration InterfacesDMZ Interface LAN SettingsLAN Interface Forgot LAN IP ?WAN Interface DMZ SettingsMaximum Transmission Unit IP Settings for WAN1 Interface Static ModeDynamic Mode Dhcp Settings for WAN1 InterfacePPPoE Mode Unnumbered InterfacesPPPoE Settings for WAN1 Interface Dhcp Server DHCP, DNS and TimeDhcp DHCP, DNS and TimeDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy Settings DNS ProxySystem Time Settings TimeRouting RoutingDynamic Routing Static RoutingStatic Routing RIP Settings Routing Table Routing TablePolicy Based Routing Policy Based RoutingTo the same destination High Availability Auto BackupBackup Configuration High AvailabilityLoad Balancing Load Balancing ConfigurationEthernet Link Detection Ethernet WAN Link Detection Network Address Translation NAT Interface ConfigurationNAT Interface Configuration NATNAT Configuration NAT ConfigurationNAT Exception NAT Exception Virtual ServerVirtual Server/NAPT SIP ALG Configuration SIP-ALGNAT Table NAT Session TableFirewall Interface ConfigurationFirewall Interface Configuration Firewall PoliciesPolicy Rules Policy RulesInbound Policies Permitted ServicesInbound Policies Permitted Services Inbound PoliciesIP Permitted Rules Outbound PoliciesAdd Permitted IP Rule Outbound Policies Outbound PoliciesIP Blocked Rules Blocked ServicesOutbound Policies Service Blocked Rule Add Blocked IP RuleOutbound Policies Untrusted Domain Domain FilterUntrusted Domain Trusted DomainCookie Filter Web FilterJava Filter ActiveX FilterKeyword Exception Keyword FilterFile Extension Filter Add Blocked MAC Address MAC FilterBlocking Log Blocking Log TableIDS Configuration Intrusion DetectionIDS Configuration Intrusion Log Table Intrusion LogBlack List Black List TableVirtual Private Network Virtual Private NetworkIPSec Passthrough IPSec Tunnel or PassthroughPeer-To-Peer IPSec TunnelVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server Configurations IPSec ServerMaximum life duration is 86400 seconds Tunnel Table Tunnel Remote ID ConfigurationLimitation IPSec Status IPSec StatusIPSec Log IPSec Log TableQuality of Service Quality of ServiceClass Configuration HTB QoS ConfigurationsQuality of Service Filter Configuration QoS Filter ConfigurationsType Of Service/DiffServ TOS/DiffServQuality of Service Device Information AdministrationAdministration Device InfoSession Log Traffic StatisticsTraffic Statistics Session Log Password ChangeSysLog System LogSystem Change PasswordPassword Recovery SystemUpdate Firmware/Configuration Upload/DownloadPing Test Remote AccessRemote Access Ping TestAdministration Dlink DRO-210i User Guide Frequently Asked Questions Frequently Asked QuestionsGeneral Q6. What is the purpose of Dhcp Server Auto Configuration? DHCP, DNSRouting High AvailabilityFirewall Frequently Asked Questions 11.6 NAT Q21. What are the call features supported by SIP-ALG? 11.7 VPN11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.
Top Page Image Contents