D-Link DRO-210i manual Frequently Asked Questions, General

Page 70

Frequently Asked Questions

Frequently Asked Questions

11.1 General

Q1. I have forgotten the router’s LAN IP Address. Now how can I access the router to configure it?

Ans: Press the Factory Default switch (RESET switch on the Front Panel) and the router settings will be restored to default settings. Now you can configure the router using https://192.168.100.254. User name is “admin” and password is also “admin”.

Q2. I have forgotten my password. How do I recover it?

Ans: Call Dlink Technical Support to inform the router’s MAC address (displayed on the product sticker of the router). The Technical Support will then generate and send you a <username> and <serial-key>.

Open the router’s Web Page: https://<LAN IP address>/html/Backup.html. The username and password is “DRO210i”. Enter the information received from the technical support, and the old password will be displayed to you for subsequent login to the router.

Q3. I have a working configuration currently. I want to try out some new firewall rules. But if the new configuration does not work out, how can I easily revert back to my original configuration.

Ans: Go to Tools → System, and click “Save” to save your working configuration. Now go to Tools → Upload, and Download your configuration to the Local Hard Disk. If your new firewall rules don’t work out, you can revert back to your previous configuration by uploading the saved DRO210.cfg through Tools → Upload, Update file option.

Q4. I want use two subnets in my LAN. How can I do this?

Ans: The router does not have a direct support for multiple subnets on the LAN. However if DMZ Port or WAN2 Port is unused, this Port can be used as the second subnet.

Q5. I am unable to access internet. What could be the problem?

Ans: To troubleshoot this issue, follow the below steps:

￿From your LAN PC, ping to the router’s LAN IP Address. If this fails, then check your cable connectivity. Also, if Firewall is enabled in the router and LAN is set as UnTrusted, ensure that ICMP protocol is permitted in the Inbound Rules.

Dlink DRO-210i User Guide

70

Image 70
Contents DRO-210i Table Of Contents Virtual Private Network About This Manual BoldProduct Overview Product OverviewDlink DRO-210i User Guide DRO-210i Package Contents Hardware DetailsFront Panel Rear Panel Software Features RoutingVPN Tools Disabled WAN2/DMZ Port ConfigurationOptional Port Configuration InterfacesDMZ Interface LAN SettingsLAN Interface Forgot LAN IP ?WAN Interface DMZ SettingsMaximum Transmission Unit IP Settings for WAN1 Interface Static ModeDynamic Mode Dhcp Settings for WAN1 InterfacePPPoE Mode Unnumbered InterfacesPPPoE Settings for WAN1 Interface Dhcp Server DHCP, DNS and TimeDhcp DHCP, DNS and TimeDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy Settings DNS ProxySystem Time Settings TimeRouting RoutingDynamic Routing Static RoutingStatic Routing RIP Settings Routing Table Routing TablePolicy Based Routing Policy Based RoutingTo the same destination High Availability Auto BackupBackup Configuration High AvailabilityLoad Balancing Load Balancing ConfigurationEthernet Link Detection Ethernet WAN Link Detection Network Address Translation NAT Interface ConfigurationNAT Interface Configuration NATNAT Configuration NAT ConfigurationNAT Exception NAT Exception Virtual ServerVirtual Server/NAPT SIP ALG Configuration SIP-ALGNAT Table NAT Session TableFirewall Interface ConfigurationFirewall Interface Configuration Firewall PoliciesPolicy Rules Policy RulesInbound Policies Permitted ServicesInbound Policies Permitted Services Inbound PoliciesIP Permitted Rules Outbound PoliciesAdd Permitted IP Rule Outbound Policies Outbound PoliciesIP Blocked Rules Blocked ServicesOutbound Policies Service Blocked Rule Add Blocked IP RuleOutbound Policies Untrusted Domain Domain FilterUntrusted Domain Trusted DomainCookie Filter Web FilterJava Filter ActiveX FilterKeyword Exception Keyword FilterFile Extension Filter Add Blocked MAC Address MAC FilterBlocking Log Blocking Log TableIDS Configuration Intrusion DetectionIDS Configuration Intrusion Log Table Intrusion LogBlack List Black List TableVirtual Private Network Virtual Private NetworkIPSec Passthrough IPSec Tunnel or PassthroughPeer-To-Peer IPSec TunnelVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server Configurations IPSec ServerMaximum life duration is 86400 seconds Tunnel Table Tunnel Remote ID ConfigurationLimitation IPSec Status IPSec StatusIPSec Log IPSec Log TableQuality of Service Quality of ServiceClass Configuration HTB QoS ConfigurationsQuality of Service Filter Configuration QoS Filter ConfigurationsType Of Service/DiffServ TOS/DiffServQuality of Service Device Information AdministrationAdministration Device InfoSession Log Traffic StatisticsTraffic Statistics Session Log Password ChangeSysLog System LogSystem Change PasswordPassword Recovery SystemUpdate Firmware/Configuration Upload/DownloadPing Test Remote AccessRemote Access Ping TestAdministration Dlink DRO-210i User Guide Frequently Asked Questions Frequently Asked QuestionsGeneral Q6. What is the purpose of Dhcp Server Auto Configuration? DHCP, DNSRouting High AvailabilityFirewall Frequently Asked Questions 11.6 NAT Q21. What are the call features supported by SIP-ALG? 11.7 VPN11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.