D-Link DRO-210i manual Tunnel Table, Limitation, Tunnel Remote ID Configuration

Page 55

Virtual Private Network

 

ESP authentication algorithm on both ends of a VPN tunnel.

 

 

AH Transform

Select the AH authentication algorithm (MD5, SHA) to be used when AH

 

is selected for the IPSec Operation. The user needs to use the same AH

 

authentication method on both ends of a VPN tunnel.

 

 

A Remote ID needs to exist for each remote user client that wants to connect to the IPSec Server at the router.

Note: Ensure that the remote user’s VPN client is configured with the same Tunnel

￿Parameters (Password, Phase 1 and Phase 2 algorithms) as the IPSec Server Tunnel at the router.

Limitation:

The router requires every remote client connected to it, to have a unique IP Address. So multiple IPSec clients behind a Many-To-One NAT Router cannot connect to the IPSec Server at the router. This is because all these IPSec clients will communicate with the router using the same global source IP Address.

Select VPN → IPSec Server → Remote ID to configure Tunnel Remote ID

Configuration as explained below.

Web UI

Tunnel Remote ID Configuration

IPSec Server Name Select the IPSec Server Tunnel for which Remote ID is to be configured.

Remote ID Type Select the type (IPV4 address, FQDN) of Remote ID to be configured.

Remote ID Data Enter the Remote ID depending on the type selected.

After entering all the information press the Apply button and the Remote IDs table will now be displayed at the bottom of the page. Press Delete button for deleting the corresponding entry.

8.4 Tunnel Table

The Tunnel Table displays the list of tunnels configured by the administrator. The administrator can edit or delete the configured tunnels from this page.

Select VPN → Tunnel Table to view/edit the Tunnel Table as explained below.

Web UI

Tunnel Configurations

Dlink DRO-210i User Guide

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents DRO-210i Table Of Contents Virtual Private Network Bold About This ManualProduct Overview Product OverviewDlink DRO-210i User Guide Hardware Details DRO-210i Package ContentsFront Panel Rear Panel Routing Software FeaturesVPN Tools Interfaces Port ConfigurationOptional Port Configuration Disabled WAN2/DMZForgot LAN IP ? LAN SettingsLAN Interface DMZ InterfaceWAN Interface DMZ SettingsMaximum Transmission Unit Dhcp Settings for WAN1 Interface Static ModeDynamic Mode IP Settings for WAN1 InterfaceUnnumbered Interfaces PPPoE ModePPPoE Settings for WAN1 Interface DHCP, DNS and Time DHCP, DNS and TimeDhcp Dhcp ServerDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy DNS Proxy SettingsTime System Time SettingsRouting RoutingDynamic Routing Static RoutingStatic Routing RIP Settings Policy Based Routing Routing TablePolicy Based Routing Routing TableTo the same destination High Availability Auto BackupBackup Configuration High AvailabilityLoad Balancing Load Balancing ConfigurationEthernet Link Detection Ethernet WAN Link Detection NAT NAT Interface ConfigurationNAT Interface Configuration Network Address TranslationNAT Configuration NAT ConfigurationNAT Exception NAT Exception Virtual ServerVirtual Server/NAPT SIP-ALG SIP ALG ConfigurationNAT Session Table NAT TableFirewall Policies Interface ConfigurationFirewall Interface Configuration FirewallPolicy Rules Policy RulesInbound Policies Permitted ServicesInbound Policies Permitted Services Inbound PoliciesIP Permitted Rules Outbound PoliciesAdd Permitted IP Rule Outbound Policies Outbound PoliciesAdd Blocked IP Rule Blocked ServicesOutbound Policies Service Blocked Rule IP Blocked RulesTrusted Domain Domain FilterUntrusted Domain Outbound Policies Untrusted DomainActiveX Filter Web FilterJava Filter Cookie FilterKeyword Exception Keyword FilterFile Extension Filter Blocking Log Table MAC FilterBlocking Log Add Blocked MAC AddressIntrusion Detection IDS ConfigurationIDS Configuration Black List Table Intrusion LogBlack List Intrusion Log TableVirtual Private Network Virtual Private NetworkIPSec Tunnel IPSec Tunnel or PassthroughPeer-To-Peer IPSec PassthroughVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server IPSec Server ConfigurationsMaximum life duration is 86400 seconds Tunnel Table Tunnel Remote ID ConfigurationLimitation IPSec Status IPSec StatusIPSec Log Table IPSec LogHTB QoS Configurations Quality of ServiceClass Configuration Quality of ServiceQuality of Service QoS Filter Configurations Filter ConfigurationTOS/DiffServ Type Of Service/DiffServQuality of Service Device Info AdministrationAdministration Device InformationSession Log Traffic StatisticsTraffic Statistics System Log Password ChangeSysLog Session LogSystem Change PasswordPassword Recovery SystemUpload/Download Update Firmware/ConfigurationPing Test Remote AccessRemote Access Ping TestAdministration Dlink DRO-210i User Guide Frequently Asked Questions Frequently Asked QuestionsGeneral DHCP, DNS Q6. What is the purpose of Dhcp Server Auto Configuration?High Availability RoutingFirewall Frequently Asked Questions 11.6 NAT 11.7 VPN Q21. What are the call features supported by SIP-ALG?11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.
Top Page Image Contents