Firewall
Blocked Services
Click on the link “Blocked Services” to get to Blocked Services configuration page. This page allows administrator to specify the application to be blocked from Trusted network to the UnTrusted network.
Web UI
Outbound Policies (Service Blocked Rule)
Add Service Rules
Transport Type | Select from the |
| blocked by the router. |
|
|
Protocol | Select from this |
| equivalent of entering the correct Transport Type and the port |
| number corresponding to a given application. |
|
|
Port Range | Enter the range of port numbers for which the current policy |
| rules will be applied. If you have only one port number to |
| enter, enter it in both fields. |
|
|
Direction | This is the direction (Outbound) of network traffic for which |
| the current policy entry will be applied. |
|
|
After entering all the information press the Apply button and the Service Blocked Rule table will now be displayed at the bottom of the page. Press Delete button for deleting the corresponding entry.
IP Blocked Rules
In Service Blocked Rule table, click the icon under IP Blocked Rule column to configure Blocked IP Rules.
Web UI
Service
Source IP
Add Blocked IP Rule
Displays the Protocol and Port for which Blocked IP Rule is being configured.
Select Any or IP Range. If IP Range is selected, the administrator can specify a range of IP addresses that the IP filter policy will be applied to. If you have only one IP address that you want to filter, enter this address in both the From and To fields.
Destination IP | Select Any or IP Range. If IP Range is selected, the |
| administrator can specify a range of IP addresses that the IP |
| filter policy will be applied to. If you have only one IP address |
| that you want to filter, enter this address in both the From and |
| To fields. |
|
|
Status | Select Enable or Disable to activate or deactivate the |
| configured entry. |
|
|
Dlink | 41 |