D-Link DRO-210i manual Traffic Statistics, Session Log

Page 64

Administration

Connection Type

Displays the WAN routing protocol selected (Static, Dynamic or PPPoE).

 

 

IP Address

Displays the current WAN IP address.

 

 

Subnet Mask

Displays the subnet mask for the WAN IP address.

 

 

Default Gateway

Displays the gateway IP address for this interface.

 

 

DMZ

 

 

 

DMZ Physical Link

Displays if a cable is plugged in (UP) or out (DOWN) on the DMZ port.

Status

 

 

 

IP Address

Displays the DMZ IP address.

 

 

Subnet Mask

Displays the subnet mask for the DMZ IP address.

 

 

10.2 Traffic Statistics

The number of packets transmitted, received, errors at each interface can be obtained through the traffic statistics page. These counters will be reset when the router is rebooted.

Select Status Traffic to view Traffic Statistics as explained below.

Web UI

Traffic Statistics

Interface Name

Displays the interface name.

 

 

Received

Displays the number of packets received.

 

 

Transmitted

Displays the number of packets transmitted.

 

 

Rx-Error

Displays number of error packets received.

 

 

Tx-Error

Displays number of error packets transmitted.

 

 

Dropped

Displays the number of packets dropped.

 

 

10.3 Session Log

The Session Log is used to log and display the sessions created at the router. For example, sessions will be created when hosts in the LAN accesses applications or services on the WAN.

Dlink DRO-210i User Guide

64

Image 64
Contents DRO-210i Table Of Contents Virtual Private Network About This Manual BoldProduct Overview Product OverviewDlink DRO-210i User Guide DRO-210i Package Contents Hardware DetailsFront Panel Rear Panel Software Features RoutingVPN Tools Port Configuration Optional Port ConfigurationDisabled WAN2/DMZ InterfacesLAN Settings LAN InterfaceDMZ Interface Forgot LAN IP ?WAN Interface DMZ SettingsMaximum Transmission Unit Static Mode Dynamic ModeIP Settings for WAN1 Interface Dhcp Settings for WAN1 InterfacePPPoE Mode Unnumbered InterfacesPPPoE Settings for WAN1 Interface DHCP, DNS and Time DhcpDhcp Server DHCP, DNS and TimeDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy Settings DNS ProxySystem Time Settings TimeRouting RoutingDynamic Routing Static RoutingStatic Routing RIP Settings Routing Table Policy Based RoutingRouting Table Policy Based RoutingTo the same destination Auto Backup Backup ConfigurationHigh Availability High AvailabilityLoad Balancing Load Balancing ConfigurationEthernet Link Detection Ethernet WAN Link Detection NAT Interface Configuration NAT Interface ConfigurationNetwork Address Translation NATNAT Configuration NAT ConfigurationNAT Exception NAT Exception Virtual ServerVirtual Server/NAPT SIP ALG Configuration SIP-ALGNAT Table NAT Session TableInterface Configuration Firewall Interface ConfigurationFirewall Firewall PoliciesPolicy Rules Policy RulesPermitted Services Inbound Policies Permitted ServicesInbound Policies Inbound PoliciesIP Permitted Rules Outbound PoliciesAdd Permitted IP Rule Outbound Policies Outbound PoliciesBlocked Services Outbound Policies Service Blocked RuleIP Blocked Rules Add Blocked IP RuleDomain Filter Untrusted DomainOutbound Policies Untrusted Domain Trusted DomainWeb Filter Java FilterCookie Filter ActiveX FilterKeyword Exception Keyword FilterFile Extension Filter MAC Filter Blocking LogAdd Blocked MAC Address Blocking Log TableIDS Configuration Intrusion DetectionIDS Configuration Intrusion Log Black ListIntrusion Log Table Black List TableVirtual Private Network Virtual Private NetworkIPSec Tunnel or Passthrough Peer-To-PeerIPSec Passthrough IPSec TunnelVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server Configurations IPSec ServerMaximum life duration is 86400 seconds Tunnel Table Tunnel Remote ID ConfigurationLimitation IPSec Status IPSec StatusIPSec Log IPSec Log TableQuality of Service Class ConfigurationQuality of Service HTB QoS ConfigurationsQuality of Service Filter Configuration QoS Filter ConfigurationsType Of Service/DiffServ TOS/DiffServQuality of Service Administration AdministrationDevice Information Device InfoSession Log Traffic StatisticsTraffic Statistics Password Change SysLogSession Log System LogChange Password Password RecoverySystem SystemUpdate Firmware/Configuration Upload/DownloadRemote Access Remote AccessPing Test Ping TestAdministration Dlink DRO-210i User Guide Frequently Asked Questions Frequently Asked QuestionsGeneral Q6. What is the purpose of Dhcp Server Auto Configuration? DHCP, DNSRouting High AvailabilityFirewall Frequently Asked Questions 11.6 NAT Q21. What are the call features supported by SIP-ALG? 11.7 VPN11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.