D-Link DRO-210i manual Dhcp, Dns, Q6. What is the purpose of Dhcp Server Auto Configuration?

Page 71

Frequently Asked Questions

￿Go to Status → Device Info, and check the Physical Link Status and Protocol Status of the WAN Interface. If the Physical Link Status is DOWN, check the cable connectivity. If the Protocol Status is DOWN, then go to Interfaces → WAN and connect the interface.

￿Go to Tools → Ping Test, and ping to the ISP Gateway IP Address. If the ping succeeds then the WAN link connectivity is fine, otherwise contact the ISP to fix this issue.

￿In Tools → Ping Test, ping to dlink.com or any other domain name. If the ping fails, then go to Misc → DNS Proxy and ensure that the DNS Server IP Addresses are configured properly.

￿Now ping to a global IP Address (eg. 4.2.2.2) from your LAN PC. If this ping fails, then either NAT or Route configuration is not proper.

o Check NAT Configuration:- Ensure that NAT is enabled on the router’s WAN interface via NAT → Interface Configuration. And either Many-To- One or Many-To-Many NAT has been configured through NAT → NAT Configuration.

o Check Route Configuration:- Verify that a default static route has been configured via the WAN Interface with the correct Gateway IP Address via Routing → Static page.

￿Now ping to a domain name (e.g. dlink.com) from your LAN PC. If this ping fails, check the DNS Configuration at your PC. The DNS Server can be set to the router’s IP Address. If your PC has been configured with a global DNS Server, then ensure that the DNS Server is reachable.

11.2 DHCP, DNS

Q6. What is the purpose of DHCP Server Auto Configuration?

Ans: This field allows you to specify whether or not the Router will automatically assign the DNS settings to the LAN computers. If Enable Auto Configuration is chosen, the DNS Proxy is enabled in the Router. The router acts as DNS server. It gets the DNS IP manually or from ISP. If Disable Auto Configuration is chosen by the administrator, the Domain Name and DNS Server Settings entered by the administrator will be assigned to the LAN computers.

Q7. I want to use the router’s DHCP Server for the LAN Systems. But I have some Servers (File Server, Web Server) in the LAN for which I want to assign specific IP Addresses. How can I do this?

Ans: Use DHCP Static Mapping feature to reserve specific IP Addresses to the Server Systems. Go to Misc → DHCP → Static Mapping, and configure the MAC address and IP Address mappings.

Dlink DRO-210i User Guide

71

Page 70 Page 72
Image 71
Page 70 Page 72
Contents DRO-210i Table Of Contents Virtual Private Network Bold About This ManualDlink DRO-210i User Guide Product OverviewProduct Overview Hardware Details DRO-210i Package ContentsFront Panel Rear Panel Routing Software FeaturesVPN Tools Interfaces Port ConfigurationOptional Port Configuration Disabled WAN2/DMZForgot LAN IP ? LAN SettingsLAN Interface DMZ InterfaceMaximum Transmission Unit DMZ SettingsWAN Interface Dhcp Settings for WAN1 Interface Static ModeDynamic Mode IP Settings for WAN1 InterfaceUnnumbered Interfaces PPPoE ModePPPoE Settings for WAN1 Interface DHCP, DNS and Time DHCP, DNS and TimeDhcp Dhcp ServerDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy DNS Proxy SettingsTime System Time SettingsRouting RoutingStatic Routing Static RoutingDynamic Routing RIP Settings Policy Based Routing Routing TablePolicy Based Routing Routing TableTo the same destination High Availability Auto BackupBackup Configuration High AvailabilityEthernet Link Detection Load Balancing ConfigurationLoad Balancing Ethernet WAN Link Detection NAT NAT Interface ConfigurationNAT Interface Configuration Network Address TranslationNAT Exception NAT ConfigurationNAT Configuration Virtual Server/NAPT Virtual ServerNAT Exception SIP-ALG SIP ALG ConfigurationNAT Session Table NAT TableFirewall Policies Interface ConfigurationFirewall Interface Configuration FirewallPolicy Rules Policy RulesInbound Policies Permitted ServicesInbound Policies Permitted Services Inbound PoliciesAdd Permitted IP Rule Outbound PoliciesIP Permitted Rules Outbound Policies Outbound PoliciesAdd Blocked IP Rule Blocked ServicesOutbound Policies Service Blocked Rule IP Blocked RulesTrusted Domain Domain FilterUntrusted Domain Outbound Policies Untrusted DomainActiveX Filter Web FilterJava Filter Cookie FilterFile Extension Filter Keyword FilterKeyword Exception Blocking Log Table MAC FilterBlocking Log Add Blocked MAC AddressIntrusion Detection IDS ConfigurationIDS Configuration Black List Table Intrusion LogBlack List Intrusion Log TableVirtual Private Network Virtual Private NetworkIPSec Tunnel IPSec Tunnel or PassthroughPeer-To-Peer IPSec PassthroughVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server IPSec Server ConfigurationsMaximum life duration is 86400 seconds Limitation Tunnel Remote ID ConfigurationTunnel Table IPSec Status IPSec StatusIPSec Log Table IPSec LogHTB QoS Configurations Quality of ServiceClass Configuration Quality of ServiceQuality of Service QoS Filter Configurations Filter ConfigurationTOS/DiffServ Type Of Service/DiffServQuality of Service Device Info AdministrationAdministration Device InformationTraffic Statistics Traffic StatisticsSession Log System Log Password ChangeSysLog Session LogSystem Change PasswordPassword Recovery SystemUpload/Download Update Firmware/ConfigurationPing Test Remote AccessRemote Access Ping TestAdministration Dlink DRO-210i User Guide General Frequently Asked QuestionsFrequently Asked Questions DHCP, DNS Q6. What is the purpose of Dhcp Server Auto Configuration?High Availability RoutingFirewall Frequently Asked Questions 11.6 NAT 11.7 VPN Q21. What are the call features supported by SIP-ALG?11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.
Top Page Image Contents