D-Link DRO-210i manual PPPoE Settings for WAN1 Interface

Page 17

Interfaces

Web UI

PPPoE Settings for WAN1 Interface

Unnumber Interface

Select the option to enable unnumbered mode. When this option is not

 

selected the router obtains an IP address from the ISP for the PPPoE

 

connection. Ensure that both ends of the PPPoE link are configured as

 

unnumbered.

 

 

IP Address

Enter the local IP address for the PPPoE connection when Unnumbered

 

mode is enabled. An unnumbered interface borrows the LAN IP address

 

by default. The administrator can edit this and configure a custom IP

 

address on the unnumbered interface. The subnet mask for an

 

unnumbered interface is always 255.255.255.255.

 

 

User Name

Enter the PPPoE username.

 

 

Password

Enter the PPPoE password.

 

 

Authentication

Select the authentication protocol (PAP, CHAP or PAP-CHAP) to be used

Type

for authentication with the PPPoE server.

 

 

Service Name

Enter the service name provided by the ISP.

(optional)

 

 

 

Host Name

Enter the host name of the PPPoE connection.

(optional)

 

 

 

MTU

Enter the MTU allowed for the PPPoE connect (preferred value 1492).

 

 

LCP Echo

Select this option to enable/disable Link Control Protocol (LCP). This is

 

used to detect PPPoE Link Failures.

 

 

Interval (sec)

Enter the time interval to send LCP Echo request from PPPoE client to

 

PPPoE server. The minimum value of this Interval is 10 seconds and the

 

maximum value is 90 seconds.

 

 

Maximum Failures

Enter the number of Maximum Failures for the PPPoE connection. This is

 

the number of times for which LCP Echo requests from PPPoE client did

 

not get response from PPPoE server. After the number of failures cross

 

this value, the PPPoE session is disconnected. The minimum value for

 

failure is 2 seconds and maximum value is 10 seconds.

 

 

After entering all the information press the Apply button and the PPPoE Status is displayed at the bottom of the screen. The administrator may Connect or Disconnect using the appropriate button.

Caution: When NAT is enabled on an unnumbered interface, local services (such as

￿DNS Proxy, VPN etc) may be affected. To overcome this problem, configure one of the Global IP addresses from the NAT pool as the unnumbered interface's IP address.

Dlink DRO-210i User Guide

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DRO-210i Table Of Contents Virtual Private Network Bold About This ManualDlink DRO-210i User Guide Product OverviewProduct Overview Hardware Details DRO-210i Package ContentsFront Panel Rear Panel Routing Software FeaturesVPN Tools Optional Port Configuration Port ConfigurationDisabled WAN2/DMZ InterfacesLAN Interface LAN SettingsDMZ Interface Forgot LAN IP ?Maximum Transmission Unit DMZ SettingsWAN Interface Dynamic Mode Static ModeIP Settings for WAN1 Interface Dhcp Settings for WAN1 InterfaceUnnumbered Interfaces PPPoE ModePPPoE Settings for WAN1 Interface Dhcp DHCP, DNS and TimeDhcp Server DHCP, DNS and TimeDhcp Static Mapping Dhcp Static MappingDhcp Relay Dhcp RelayDNS Proxy DNS Proxy SettingsTime System Time SettingsRouting RoutingStatic Routing Static RoutingDynamic Routing RIP Settings Policy Based Routing Routing TableRouting Table Policy Based RoutingTo the same destination Backup Configuration Auto BackupHigh Availability High AvailabilityEthernet Link Detection Load Balancing ConfigurationLoad Balancing Ethernet WAN Link Detection NAT Interface Configuration NAT Interface ConfigurationNetwork Address Translation NATNAT Exception NAT ConfigurationNAT Configuration Virtual Server/NAPT Virtual ServerNAT Exception SIP-ALG SIP ALG ConfigurationNAT Session Table NAT TableFirewall Interface Configuration Interface ConfigurationFirewall Firewall PoliciesPolicy Rules Policy RulesInbound Policies Permitted Services Permitted ServicesInbound Policies Inbound PoliciesAdd Permitted IP Rule Outbound PoliciesIP Permitted Rules Outbound Policies Outbound PoliciesOutbound Policies Service Blocked Rule Blocked ServicesIP Blocked Rules Add Blocked IP RuleUntrusted Domain Domain FilterOutbound Policies Untrusted Domain Trusted DomainJava Filter Web FilterCookie Filter ActiveX FilterFile Extension Filter Keyword FilterKeyword Exception Blocking Log MAC FilterAdd Blocked MAC Address Blocking Log TableIntrusion Detection IDS ConfigurationIDS Configuration Black List Intrusion LogIntrusion Log Table Black List TableVirtual Private Network Virtual Private NetworkPeer-To-Peer IPSec Tunnel or PassthroughIPSec Passthrough IPSec TunnelVirtual Private Network Same IKE Encryption algorithm on both ends of a VPN tunnel IPSec Server IPSec Server ConfigurationsMaximum life duration is 86400 seconds Limitation Tunnel Remote ID ConfigurationTunnel Table IPSec Status IPSec StatusIPSec Log Table IPSec LogClass Configuration Quality of ServiceQuality of Service HTB QoS ConfigurationsQuality of Service QoS Filter Configurations Filter ConfigurationTOS/DiffServ Type Of Service/DiffServQuality of Service Administration AdministrationDevice Information Device InfoTraffic Statistics Traffic StatisticsSession Log SysLog Password ChangeSession Log System LogPassword Recovery Change PasswordSystem SystemUpload/Download Update Firmware/ConfigurationRemote Access Remote AccessPing Test Ping TestAdministration Dlink DRO-210i User Guide General Frequently Asked QuestionsFrequently Asked Questions DHCP, DNS Q6. What is the purpose of Dhcp Server Auto Configuration?High Availability RoutingFirewall Frequently Asked Questions 11.6 NAT 11.7 VPN Q21. What are the call features supported by SIP-ALG?11.8 QoS Frequently Asked Questions

DRO-210i specifications

The D-Link DRO-210i is an innovative smart security camera designed to bring peace of mind to homeowners and businesses alike. With its sleek design and advanced features, the DRO-210i stands out as a reliable surveillance solution that caters to a range of security needs.

One of the main features of the DRO-210i is its high-definition video streaming capability. With a resolution of up to 1080p, users can enjoy crisp and clear video footage, ensuring that every detail is captured. This camera is equipped with a wide-angle lens, offering a 130-degree field of view, which allows for comprehensive monitoring of large areas, making it ideal for both indoor and outdoor use.

The DRO-210i utilizes advanced infrared night vision technology, enabling it to capture clear images even in complete darkness. This feature ensures that security is maintained 24/7, offering peace of mind regardless of lighting conditions. The camera automatically switches to night mode when it detects low light, ensuring continuous monitoring without manual intervention.

Another standout characteristic of the DRO-210i is its motion detection capabilities. The camera features customizable motion zones and alerts, allowing users to define specific areas for monitoring. When motion is detected, the camera can send real-time alerts to the user's smartphone or email, ensuring prompt responses to any potential security threats.

The integration of two-way audio allows for real-time communication through the camera. Users can listen and speak through the camera's built-in speaker and microphone, providing an added layer of security. This feature is particularly useful for engaging with visitors or deterring potential intruders.

For convenient storage options, the DRO-210i supports both local and cloud storage. Users can insert a microSD card for local recording or opt for D-Link’s cloud storage service for easy and secure access to footage from anywhere in the world. This flexibility ensures that important recordings are safely stored and easily retrievable.

The camera's compatibility with smart home systems is an essential aspect of its design. The DRO-210i works seamlessly with various smart home ecosystems, allowing users to integrate it into their existing setups, enhancing their overall smart home experience.

In summary, the D-Link DRO-210i is a feature-rich, user-friendly security camera equipped with high-definition video, night vision, motion detection, two-way audio, and flexible storage options. Its compatibility with smart home technologies makes it an ideal choice for those seeking a comprehensive surveillance solution that not only enhances security but also integrates with their lifestyle.
Top Page Image Contents