Actiontec electronic IS560LH user manual V90=x V.90 Downstream Rate and Control

-V90=x V.90 Downstream Rate and Control

Use this command to enable/disable V.90 connection and to control V.90 connec- tion rates. The command syntax is AT-V90=x. Where x is a value from the list below.

AT-V90=n	Downstream Rate
0	V.90 disabled
1	Auto Rate (default)
2	28000 bits / s
3	29333 bits / s
4	30666 bits / s
5	32000 bits / s
6	33333 bits / s
7	34666 bits / s
8	36000 bits / s
9	37333 bits / s
10	38666 bits / s
11	40000 bits / s
12	41333 bits / s
13	42666 bits / s
14	44000 bits / s
15	45333 bits / s
16	46666 bits / s
17	48000 bits / s
18	49333 bits / s
19	50666 bits / s
20	52000 bits / s
21	53333 bits / s
AT-V90?	shows the current value and displays the selected rate.
AT-V90=?	show the range (0-21)

%B View Numbers in Blacklist

If blacklisting is in effect, this command displays the numbers for which the last call attempted in the past two hours failed. The ERROR result code appears in countries that do not require blacklisting.

61