Airlink Hardware, Host RJ-11 IP Gateway Top Panel not to scale, Status - Normal Operation

Page 18

Hardware

Hardware

FIGURE 3. Host RJ-11 IP Gateway Top Panel (not to scale)

•STATUS - Indicates the overall status of the device.

TABLE 1. Status - Normal Operation

LED Condition	Description

Blinking Yellow	The Host RJ-11 IP Gateway is starting up.

Solid Green	The Host RJ-11 IP Gateway is obtaining an IP address from
	the modem.

Blinking Green	The Host RJ-11 IP Gateway has an IP address and is operat-
	ing normally.

Off	No power to the Host RJ-11 IP Gateway.

TABLE 2. Status - Resetting the Configuration

LED Condition	Description

Alternating Green/Red	While the Reset button is held in, the status light will begin
	to blink in this sequence to indicate the Host RJ-11 IP Gate-
	way will shortly restore the factory default condition.
	If you do not want to restore the factory default, release the
	button before the sequence changes to Green/Yellow.

Alternating Green/Yellow	While the Reset button is held in, the status light will begin
	to blink in this sequence to indicate the factory default con-
	figuration was restored. Once the Host RJ-11 IP Gateway
	indicates the configuration was restored, you can release the
	reset button.

TABLE 3. Status - Error Conditions

LED Condition	Description

Alternating Green/Red	A serious system error occurred. See the system log for
	more details.

Host RJ-11 IP Gateway User Guide, version

17

Image 18

Contents User Guide Version 1.02 - FebruaryHost RJ-11 IP Gateway Copyright 1993-2007 AirLink Communications, Inc. All rights reservedConnectors and Reset button ContentsInstallation Service ConfigurationWarranty Terms and Conditions SpecificationsAT Commands ContentsIntroduction CHAPTERFIGURE 1. Host RJ-11 Ethernet Connectivity for a Legacy Host Introduction Host RJ-11 IP Gateway FeaturesOne power connector One RJ-11 phone portSoftware Required InstallationBefore You Start Hardware RequiredDefault settings Configuring your Raven-E for the Host RJ-11 IP GatewayInstallation DHCP server enabledFIGURE 2. Wireless Ace PPP/Ethernet Configuring the Raven-EFIGURE 1. Wireless Ace Connect Public ModeFIGURE 3. Wireless Ace PPP/Ethernet FIGURE 4. Wireless Ace WritePrivate Mode Gateway without a Raven-E Configuring the Intial IP Address for the Host RJ-11 IPFIGURE 5. Wireless Ace Status Start the Port UtilityE. Click Assign IP Address FIGURE 6. Port UtilityFIGURE 7. Add Unlitsed Port Server B. Click on Assign IP Address optionalFIGURE 8. Local Area Connection B. Select Internet Protocol TCP/IP and click on PropertiesFIGURE 9. TCP/IP Properties DHCP client disabled Host RJ-11 IP Gateway DefaultsConfiguring the Host RJ-11 IP Gateway Phone port 8 data bits, no parity, and 1 stop bit 8N1FIGURE 12. Host RJ-11 IP Gateway Network Settings DHCP ModeFIGURE 11. Host RJ-11 IP Gateway Interface Static IP Mode FIGURE 13. RJ-11 IP Gateway Network Interface SettingsFIGURE 14. Host RJ-11 IP Gateway Network Interface Settings C. Click the Save IP Address/Netmask buttonFIGURE 15. Host RJ-11 IP Gateway Serial Settings FIGURE 16. Host RJ-11 IP Gateway Reset/RebootHardware Connectors and Reset buttonFIGURE 2. Left side RJ-11phone connector not to scale Status LEDsHardware TABLE 2. Status - Resetting the ConfigurationTABLE 3. Status - Error Conditions FIGURE 3. Host RJ-11 IP Gateway Top Panel not to scaleTABLE 4. Ethernet TABLE 5. PhoneConfiguration Settings and Commands Web-based InterfaceFIGURE 1. Web Browser Enter the Location Welcome Service ConfigurationConfiguration Settings and Commands FIGURE 2. Host RJ-11 IP Gateway Web Browser-based InterfaceSerial Settings FIGURE 4. Host RJ-11 IP Gateway Serial SettingsPort Services FIGURE 5. Host RJ-11 IP Gateway Port ServicesSettings Phone Number TranslationFIGURE 6. Host RJ-11 IP Gateway Phone Number Translation Edit ProtocolNetwork Translation FIGURE 7. Host RJ-11 IP Gateway Network TranslationNetwork Settings Network ConfigurationProtocol Settings FIGURE 8. Host RJ-11 IP Gateway Protocol SettingsFIGURE 9. Host RJ-11 IP Gateway Network Interface Settings DNS Settings FIGURE 10. Host RJ-11 IP Gateway DNS SettingsTime Settings IP RoutingFIGURE 11. Host RJ-11 IP Gateway IP Routing Security Settings FIGURE 12. Host RJ-11 IP Gateway Time SettingsFIGURE 13. Host RJ-11 IP Gateway Security Settings Online Update FIGURE 15. Host RJ-11 IP Gateway Online Update - middle of the pageTroubleshooting FIGURE 16. Host RJ-11 IP Gateway Online Update - bottom of the pageStatus and Logs Port Status FIGURE 17. Host RJ-11 IP Gateway TroubleshootingSystem Log FIGURE 18. Host RJ-11 IP Gateway System LogOS and Network Information FIGURE 19. Host RJ-11 IP Gateway Port StatusLog Files and Settings FIGURE 20. Host RJ-11 IP Gateway Log SettingsFIGURE 21. Host RJ-11 IP Gateway Emailing Debug Information CommandsPing FIGURE 22. Host RJ-11 IP Gateway PingReset/Reboot FIGURE 23. Host RJ-11 IP Gateway Reset/RebootConnections SpecificationsPhysical Dimensions Phone and Modem standardsSpecifications Optional Mounting BracketFIGURE 1. Mounting Bracket, part number AT Commands APPENDIX BAT Commands Response Codes S-RegistersModem Signal Behavior Phone NumbersPort Settings One Year Standard Equipment Warranty Warranty Terms and ConditionsStandard Software Warranty RemedyLIMITATION OF LIABILITY Warranty Terms and ConditionsWARRANTY DISCLAIMER General Conditionsbe affected or impaired thereby. The laws of the State of California shall govern these Warranty Terms. These Warranty Terms constitute the entire agreement between the parties hereto pertain- ing to the subject matter hereof, and any and all written or oral agreements heretofore existing between the parties hereto are expressly canceled and/or superseded. These Warranty Terms shall prevail notwithstanding any variance with terms and conditions of any purchase order. Any modifi- cations of these Warranty Terms must be in writing and signed by a duly authorized officer of both parties hereto AirLink Documentation and Guides AirLink Technical SupportAirLink Support Web Site Contacting Technical Support