Airlink manual Static IP Mode, RJ-11 IP Gateway Network Interface Settings, Installation

Page 15

FIGURE 13. RJ-11 IP Gateway: Network Interface Settings

Installation

FIGURE 13. RJ-11 IP Gateway: Network Interface Settings

Static IP Mode

If the Host RJ-11 IP Gateway is going to be on a LAN, you many wish to set a static IP address. Use this mode only if you have configured Private Mode for the modem. The default for the Host RJ-11 IP Gateway is a static IP address of 192.168.1.3.

FIGURE 14. Host RJ-11 IP Gateway: Network Interface Settings

192.168.1.3

255.255.255.0

A.Set the IPV4 Address to match the *HOSTPRIVIP in step 3 of the previous section.

B.Set the IPV4 Netmask to match the *HOSTNETMASK in step 3 of the previous section.

C.Click the Save IP Address/Netmask button.

4.Select Serial Settings from the menu on the left.

The Serial Settings page allows you to specify the baud rate, protocol, character size, parity, stop bits, and flow control behavior for the RJ-11 port (Phone).

Host RJ-11 IP Gateway User Guide, version

14

Image 15

Contents Copyright 1993-2007 AirLink Communications, Inc. All rights reserved Version 1.02 - FebruaryHost RJ-11 IP Gateway User GuideService Configuration ContentsInstallation Connectors and Reset buttonContents SpecificationsAT Commands Warranty Terms and ConditionsIntroduction CHAPTERFIGURE 1. Host RJ-11 Ethernet Connectivity for a Legacy Host One RJ-11 phone port Host RJ-11 IP Gateway FeaturesOne power connector IntroductionHardware Required InstallationBefore You Start Software RequiredDHCP server enabled Configuring your Raven-E for the Host RJ-11 IP GatewayInstallation Default settingsPublic Mode Configuring the Raven-EFIGURE 1. Wireless Ace Connect FIGURE 2. Wireless Ace PPP/EthernetFIGURE 3. Wireless Ace PPP/Ethernet FIGURE 4. Wireless Ace WritePrivate Mode Start the Port Utility Configuring the Intial IP Address for the Host RJ-11 IPFIGURE 5. Wireless Ace Status Gateway without a Raven-Eoptional FIGURE 6. Port UtilityFIGURE 7. Add Unlitsed Port Server B. Click on Assign IP Address E. Click Assign IP Address FIGURE 8. Local Area Connection B. Select Internet Protocol TCP/IP and click on Properties FIGURE 9. TCP/IP Properties Phone port 8 data bits, no parity, and 1 stop bit 8N1 Host RJ-11 IP Gateway DefaultsConfiguring the Host RJ-11 IP Gateway DHCP client disabledFIGURE 12. Host RJ-11 IP Gateway Network Settings DHCP ModeFIGURE 11. Host RJ-11 IP Gateway Interface C. Click the Save IP Address/Netmask button FIGURE 13. RJ-11 IP Gateway Network Interface SettingsFIGURE 14. Host RJ-11 IP Gateway Network Interface Settings Static IP ModeFIGURE 16. Host RJ-11 IP Gateway Reset/Reboot FIGURE 15. Host RJ-11 IP Gateway Serial SettingsStatus LEDs Connectors and Reset buttonFIGURE 2. Left side RJ-11phone connector not to scale HardwareFIGURE 3. Host RJ-11 IP Gateway Top Panel not to scale TABLE 2. Status - Resetting the ConfigurationTABLE 3. Status - Error Conditions HardwareTABLE 5. Phone TABLE 4. EthernetConfiguration Settings and Commands Web-based InterfaceFIGURE 1. Web Browser Enter the Location FIGURE 2. Host RJ-11 IP Gateway Web Browser-based Interface Service ConfigurationConfiguration Settings and Commands WelcomeFIGURE 4. Host RJ-11 IP Gateway Serial Settings Serial SettingsFIGURE 5. Host RJ-11 IP Gateway Port Services Port ServicesEdit Protocol Phone Number TranslationFIGURE 6. Host RJ-11 IP Gateway Phone Number Translation SettingsFIGURE 7. Host RJ-11 IP Gateway Network Translation Network TranslationFIGURE 8. Host RJ-11 IP Gateway Protocol Settings Network ConfigurationProtocol Settings Network SettingsFIGURE 9. Host RJ-11 IP Gateway Network Interface Settings FIGURE 10. Host RJ-11 IP Gateway DNS Settings DNS SettingsTime Settings IP RoutingFIGURE 11. Host RJ-11 IP Gateway IP Routing FIGURE 12. Host RJ-11 IP Gateway Time Settings Security SettingsFIGURE 13. Host RJ-11 IP Gateway Security Settings FIGURE 15. Host RJ-11 IP Gateway Online Update - middle of the page Online UpdateTroubleshooting FIGURE 16. Host RJ-11 IP Gateway Online Update - bottom of the pageStatus and Logs FIGURE 18. Host RJ-11 IP Gateway System Log FIGURE 17. Host RJ-11 IP Gateway TroubleshootingSystem Log Port StatusFIGURE 19. Host RJ-11 IP Gateway Port Status OS and Network InformationFIGURE 20. Host RJ-11 IP Gateway Log Settings Log Files and SettingsFIGURE 22. Host RJ-11 IP Gateway Ping CommandsPing FIGURE 21. Host RJ-11 IP Gateway Emailing Debug InformationFIGURE 23. Host RJ-11 IP Gateway Reset/Reboot Reset/RebootPhone and Modem standards SpecificationsPhysical Dimensions ConnectionsSpecifications Optional Mounting BracketFIGURE 1. Mounting Bracket, part number APPENDIX B AT CommandsAT Commands S-Registers Response CodesPhone Numbers Modem Signal BehaviorPort Settings Remedy Warranty Terms and ConditionsStandard Software Warranty One Year Standard Equipment WarrantyGeneral Conditions Warranty Terms and ConditionsWARRANTY DISCLAIMER LIMITATION OF LIABILITYbe affected or impaired thereby. The laws of the State of California shall govern these Warranty Terms. These Warranty Terms constitute the entire agreement between the parties hereto pertain- ing to the subject matter hereof, and any and all written or oral agreements heretofore existing between the parties hereto are expressly canceled and/or superseded. These Warranty Terms shall prevail notwithstanding any variance with terms and conditions of any purchase order. Any modifi- cations of these Warranty Terms must be in writing and signed by a duly authorized officer of both parties hereto Contacting Technical Support AirLink Technical SupportAirLink Support Web Site AirLink Documentation and Guides