AT Commands
Format | Example | Notes |
|
|
|
Fixed format | aaabbbcccddd or | 12 digit IP address, each number is three decimal |
| 192168001001 | digits with leading zeroes |
|
| |
|
|
|
Optional port | :xxxxx | Decimal TCP port number from 0..65535 |
number |
|
|
|
|
|
•If no phone number (IP address) is specified, the Destination IP Address configured for the port is used.
•If no port number is specified, the Destination TCP Port configured for the port is used.
•The source port for the TCP connection follows the Source TCP Port configured for the port.
Port Settings
Most of the serial port settings (like baud rate) are controlled by the configured port settings on the device server. Modem emulation does not support changing these from AT commands.
Host | 44 |