Airlink RJ-11 manual Private Mode

Installation

Private Mode

Configure the Raven-E for Private Mode. In this mode, the modem communicates with the Host RJ-11 IP Gateway via a static local IP address.

If the modem and the Host RJ-11 IP Gateway are going to be on a LAN with other computers and devices you may want to use Private Mode. On a LAN, a DHCP server other than the modem may give the Host RJ-11 IP Gateway an IP address to which the modem would not know to send its messages.

a. Set the *HOSTPRIVMODE to 1.

b. Set the *HOSTPRIVIP to the IP address for the Host RJ-11 IP Gateway (in the example, 192.168.1.4).

c. Verify the *HOSTPEERIP is the local IP of the modem. Set this to 192.168.1.3 if you are keep- ing the default IP address for the Host RJ-11 IP Gateway.

d. Set the *HOSTNETMASK to the Subnet Mask (generally 255.255.255.0).

FIGURE 3. Wireless Ace: PPP/Ethernet

	1 - Use Private IP
	192.168.1.4
	192.168.1.3
	255.255.255.0
4.	When you have finished configuring the Ethernet settings, click the Write button on the tool bar
	of Wireless Ace and wait for the message “Write Successful” to appear in the status bar.

FIGURE 4. Wireless Ace: Write

5. Note the IP address given to the modem by your cellular provider.

A.Select Status from the menu on the left side of Wireless Ace (under “Groups”).

Host RJ-11 IP Gateway User Guide, version 8