Installation
FIGURE 15. Host RJ-11 IP Gateway: Serial Settings
8
None
1
| For more information on these settings, refer to page 21. |
| Note: For most configurations, the default settings are best. Change these parame- |
| ters only if you know the device you will be connecting to the Host |
| way requires special settings. |
5. | Click on the Reset/Reboot menu option for the IP Address configuration and any changes to the |
serial port settings to take effect. |
FIGURE 16. Host RJ-11 IP Gateway: Reset/Reboot
Click the Reboot button to restart the Host
Host | 15 |