Airlink RJ-11 manual Configuring the Raven-E, Public Mode, Wireless Ace Connect, Installation

Page 8

Configuring the Raven-E

Installation

1.

2.

3.

Configuring the Raven-E

Connect your Raven-E directly to the Ethernet port on your computer and to power.

Start Wireless Ace and connect to your modem.

Start > All Programs > AirLink Communications > Wireless Ace 3G > Wireless Ace 3G

A.Click on Connect.

B.Select UDP.

C.Type in the modem’s local IP (default is 192.168.13.31).

D.Type in the modem’s password (default 12345)

FIGURE 1. Wireless Ace: Connect

Select PPP/Ethernet from the menu on the left side of Wireless Ace (under “Groups”).

Public Mode

Configure the Raven-E for Public Mode. Set the *HOSTPRIVMODE to 0. In this mode, the modem assigns the Host RJ-11 IP Gateway the IP address it has received from your cellular pro- vider. This is the default setting for the modem.

FIGURE 2. Wireless Ace: PPP/Ethernet

0 - Use Public IP

Note: The Host RJ-11 IP Gateway is set to a default static IP address of 192.168.1.3, if you want to keep that IP address for the Host RJ-11 IP Gateway, use Public Mode to set the static IP address for the modem and gateway..

Host RJ-11 IP Gateway User Guide, version

7

Image 8

Contents Version 1.02 - February Host RJ-11 IP GatewayUser Guide Copyright 1993-2007 AirLink Communications, Inc. All rights reservedContents InstallationConnectors and Reset button Service ConfigurationSpecifications AT CommandsWarranty Terms and Conditions ContentsFIGURE 1. Host RJ-11 Ethernet Connectivity for a Legacy Host IntroductionCHAPTER Host RJ-11 IP Gateway Features One power connectorIntroduction One RJ-11 phone portInstallation Before You StartSoftware Required Hardware RequiredConfiguring your Raven-E for the Host RJ-11 IP Gateway InstallationDefault settings DHCP server enabledConfiguring the Raven-E FIGURE 1. Wireless Ace ConnectFIGURE 2. Wireless Ace PPP/Ethernet Public ModePrivate Mode FIGURE 3. Wireless Ace PPP/EthernetFIGURE 4. Wireless Ace Write Configuring the Intial IP Address for the Host RJ-11 IP FIGURE 5. Wireless Ace StatusGateway without a Raven-E Start the Port UtilityFIGURE 6. Port Utility FIGURE 7. Add Unlitsed Port Server B. Click on Assign IP AddressE. Click Assign IP Address optionalFIGURE 9. TCP/IP Properties FIGURE 8. Local Area ConnectionB. Select Internet Protocol TCP/IP and click on Properties Host RJ-11 IP Gateway Defaults Configuring the Host RJ-11 IP GatewayDHCP client disabled Phone port 8 data bits, no parity, and 1 stop bit 8N1FIGURE 11. Host RJ-11 IP Gateway Interface FIGURE 12. Host RJ-11 IP Gateway Network SettingsDHCP Mode FIGURE 13. RJ-11 IP Gateway Network Interface Settings FIGURE 14. Host RJ-11 IP Gateway Network Interface SettingsStatic IP Mode C. Click the Save IP Address/Netmask buttonFIGURE 15. Host RJ-11 IP Gateway Serial Settings FIGURE 16. Host RJ-11 IP Gateway Reset/RebootConnectors and Reset button FIGURE 2. Left side RJ-11phone connector not to scaleHardware Status LEDsTABLE 2. Status - Resetting the Configuration TABLE 3. Status - Error ConditionsHardware FIGURE 3. Host RJ-11 IP Gateway Top Panel not to scaleTABLE 4. Ethernet TABLE 5. PhoneFIGURE 1. Web Browser Enter the Location Configuration Settings and CommandsWeb-based Interface Service Configuration Configuration Settings and CommandsWelcome FIGURE 2. Host RJ-11 IP Gateway Web Browser-based InterfaceSerial Settings FIGURE 4. Host RJ-11 IP Gateway Serial SettingsPort Services FIGURE 5. Host RJ-11 IP Gateway Port ServicesPhone Number Translation FIGURE 6. Host RJ-11 IP Gateway Phone Number TranslationSettings Edit ProtocolNetwork Translation FIGURE 7. Host RJ-11 IP Gateway Network TranslationNetwork Configuration Protocol SettingsNetwork Settings FIGURE 8. Host RJ-11 IP Gateway Protocol SettingsFIGURE 9. Host RJ-11 IP Gateway Network Interface Settings DNS Settings FIGURE 10. Host RJ-11 IP Gateway DNS SettingsFIGURE 11. Host RJ-11 IP Gateway IP Routing Time SettingsIP Routing Security Settings FIGURE 12. Host RJ-11 IP Gateway Time SettingsFIGURE 13. Host RJ-11 IP Gateway Security Settings Online Update FIGURE 15. Host RJ-11 IP Gateway Online Update - middle of the pageStatus and Logs TroubleshootingFIGURE 16. Host RJ-11 IP Gateway Online Update - bottom of the page FIGURE 17. Host RJ-11 IP Gateway Troubleshooting System LogPort Status FIGURE 18. Host RJ-11 IP Gateway System LogOS and Network Information FIGURE 19. Host RJ-11 IP Gateway Port StatusLog Files and Settings FIGURE 20. Host RJ-11 IP Gateway Log SettingsCommands PingFIGURE 21. Host RJ-11 IP Gateway Emailing Debug Information FIGURE 22. Host RJ-11 IP Gateway PingReset/Reboot FIGURE 23. Host RJ-11 IP Gateway Reset/RebootSpecifications Physical DimensionsConnections Phone and Modem standardsFIGURE 1. Mounting Bracket, part number SpecificationsOptional Mounting Bracket AT Commands APPENDIX BAT Commands Response Codes S-RegistersModem Signal Behavior Phone NumbersPort Settings Warranty Terms and Conditions Standard Software WarrantyOne Year Standard Equipment Warranty RemedyWarranty Terms and Conditions WARRANTY DISCLAIMERLIMITATION OF LIABILITY General Conditionsbe affected or impaired thereby. The laws of the State of California shall govern these Warranty Terms. These Warranty Terms constitute the entire agreement between the parties hereto pertain- ing to the subject matter hereof, and any and all written or oral agreements heretofore existing between the parties hereto are expressly canceled and/or superseded. These Warranty Terms shall prevail notwithstanding any variance with terms and conditions of any purchase order. Any modifi- cations of these Warranty Terms must be in writing and signed by a duly authorized officer of both parties hereto AirLink Technical Support AirLink Support Web SiteAirLink Documentation and Guides Contacting Technical Support