Configuration Settings and Commands
FIGURE 21. Host RJ-11 IP Gateway: Emailing Debug Information
The SMTP Server Information is the SMTP (mail host) you will be using to send the debug infor- mation. You can usually find the SMTP settings in the email client you use. Not all email hosts will allow relaying through their host.
Commands
The Host
Ping
You can use the Ping command to test a network connection.
FIGURE 22. Host RJ-11 IP Gateway: Ping
Enter the IP address to Ping or a Hostname and the Number of Pings then press the Ping button. The command will display the results as follows:
Sending 10 PINGs to 209.75.217.6...
Response from 209.75.217.6: icmp_seq=0, time=10.0 ms
Response from 209.75.217.6: icmp_seq=1, time=10.0 ms
Response from 209.75.217.6: icmp_seq=2, time=10.0 ms
Response from 209.75.217.6: icmp_seq=3, time=10.0 ms
Response from 209.75.217.6: icmp_seq=4, time=10.0 ms
Response from 209.75.217.6: icmp_seq=5, time=10.0 ms
Host | 36 |